электродвигатели 1S
- Библиотека дву-/трехмерных CAD рисунков
- Данные деталей EPLAN
- R88M-1_ 1S-series Servo Motor Спецификация
Thank you for downloading the R88M-1_ 1S-series Servo Motor Спецификация
Download againDid you know that 4 out of 5 distributors buy this product in a bundle?
There are many variations of passages of Lorem Ipsum available, but the majority have suffered alteration in some form, by injected humour, or randomised words which don't look even slightly believable.
Read more
-
OMRON - 1S Servo System-
OMRON - 1S Servo System
1S is a servo system designed to optimize the full cycle, through the machine design, installation and commissioning tasks and finally to the maintenance once in production. The 1S servo offers high resolution multi-turn encoder without battery backup, safety network built.-in and improved loop control allowing accurate and higher machine productivity.
01:13
-
Для простого проектирования и обслуживания машин
Номинальные значения: 230 В~ от 50 Вт до 1,5 кВт, 400 В~ от 400 Вт до 3 кВт
- 23-разрядный энкодер
- Компактные размеры
- Многооборотный энкодер без механических узлов: 16 разрядов, 65 536 оборотов
- Абсолютный многооборотный энкодер без источника питания или инкрементный энкодер
- Предварительно смонтированные кабели двигателя
- Сконструированы для простого обеспечения электромагнитной совместимости Номинальные параметры
Ordering information
Servo motors
Note:
① Select motor from R88M-1_ family using motor tables in next pages.
Servo drives
Note:
② Refer to the 1S servo drive section for detailed drive specifications and selection of drive accessories.
Servo motors
Servo motors 3000 r/min (100 W to 3 kW)
| Symbol | Specifications | Compatible 1S servo drive | Order code | |||||
|---|---|---|---|---|---|---|---|---|
| Voltage | Encoder and design | Rated torque | Capacity | Flange size | ||||
| ① | 230 V | Incremental encoder (23-bit)Straight shaft with key and tap |
Without brake | 0.318 Nm | 100 W | 40 mm | R88D-1SN01H-ECT | R88M-1M10030H-S2 |
| 0.637 Nm | 200 W | 60 mm | R88D-1SN02H-ECT | R88M-1M20030H-S2 | ||||
| 1.27 Nm | 400 W | R88D-1SN04H-ECT | R88M-1M40030H-S2 | |||||
| 2.39 Nm | 750 W | 80 mm | R88D-1SN08H-ECT | R88M-1M75030H-S2 | ||||
| 3.18 Nm | 1 kW | 100 mm | R88D-1SN15H-ECT | R88M-1L1K030H-S2 | ||||
| 4.77 Nm | 1.5 kW | R88D-1SN15H-ECT | R88M-1L1K530H-S2 | |||||
| With brake | 0.318 Nm | 100 W | 40 mm | R88D-1SN01H-ECT | R88M-1M10030H-BS2 | |||
| 0.637 Nm | 200 W | 60 mm | R88D-1SN02H-ECT | R88M-1M20030H-BS2 | ||||
| 1.27 Nm | 400 W | R88D-1SN04H-ECT | R88M-1M40030H-BS2 | |||||
| 2.39 Nm | 750 W | 80 mm | R88D-1SN08H-ECT | R88M-1M75030H-BS2 | ||||
| 3.18 Nm | 1 kW | 100 mm | R88D-1SN15H-ECT | R88M-1L1K030H-BS2 | ||||
| 4.77 Nm | 1.5 kW | R88D-1SN15H-ECT | R88M-1L1K530H-BS2 | |||||
| Absolute encoder (23-bit)Straight shaft with key and tap |
Without brake | 0.159 Nm | 50 W | 40 mm | R88D-1SN01H-ECT | R88M-1M05030T-S2 | ||
| 0.318 Nm | 100 W | R88D-1SN01H-ECT | R88M-1M10030T-S2 | |||||
| 0.637 Nm | 200 W | 60 mm | R88D-1SN02H-ECT | R88M-1M20030T-S2 | ||||
| 1.27 Nm | 400 W | R88D-1SN04H-ECT | R88M-1M40030T-S2 | |||||
| 2.39 Nm | 750 W | 80 mm | R88D-1SN08H-ECT | R88M-1M75030T-S2 | ||||
| 3.18 Nm | 1 kW | 100 mm | R88D-1SN15H-ECT | R88M-1L1K030T-S2 | ||||
| 4.77 Nm | 1.5 kW | R88D-1SN15H-ECT | R88M-1L1K530T-S2 | |||||
| With brake | 0.159 Nm | 50 W | 40 mm | R88D-1SN01H-ECT | R88M-1M05030T-BS2 | |||
| 0.318 Nm | 100 W | R88D-1SN01H-ECT | R88M-1M10030T-BS2 | |||||
| 0.637 Nm | 200 W | 60 mm | R88D-1SN02H-ECT | R88M-1M20030T-BS2 | ||||
| 1.27 Nm | 400 W | R88D-1SN04H-ECT | R88M-1M40030T-BS2 | |||||
| 2.39 Nm | 750 W | 80 mm | R88D-1SN08H-ECT | R88M-1M75030T-BS2 | ||||
| 3.18 Nm | 1 kW | 100 mm | R88D-1SN15H-ECT | R88M-1L1K030T-BS2 | ||||
| 4.77 Nm | 1.5 kW | R88D-1SN15H-ECT | R88M-1L1K530T-BS2 | |||||
| 400 V | Without brake | 2.39 Nm | 750 W | R88D-1SN10F-ECT | R88M-1L75030C-S2 | |||
| 3.18 Nm | 1 kW | R88D-1SN10F-ECT | R88M-1L1K030C-S2 | |||||
| 4.77 Nm | 1.5 kW | R88D-1SN15F-ECT | R88M-1L1K530C-S2 | |||||
| 6.37 Nm | 2 kW | R88D-1SN20F-ECT | R88M-1L2K030C-S2 | |||||
| 9.55 Nm | 3 kW | 130 mm | R88D-1SN30F-ECT | R88M-1L3K030C-S2 | ||||
| With brake | 2.39 Nm | 750 W | 100 mm | R88D-1SN10F-ECT | R88M-1L75030C-BS2 | |||
| 3.18 Nm | 1 kW | R88D-1SN10F-ECT | R88M-1L1K030C-BS2 | |||||
| 4.77 Nm | 1.5 kW | R88D-1SN15F-ECT | R88M-1L1K530C-BS2 | |||||
| 6.37 Nm | 2 kW | R88D-1SN20F-ECT | R88M-1L2K030C-BS2 | |||||
| 9.55 Nm | 3 kW | 130 mm | R88D-1SN30F-ECT | R88M-1L3K030C-BS2 | ||||
Servo motors 2000 r/min (400 W to 3 kW)
| Symbol | Specifications | Compatible 1S servo drive | Order code | |||||
|---|---|---|---|---|---|---|---|---|
| Voltage | Encoder and design | Rated torque | Capacity | Flange size | ||||
| ① | 230 V | Incremental encoder (23-bit)Straight shaft with key and tap |
Without brake | 4.77 Nm | 1 kW | 130 mm | R88D-1SN15H-ECT | R88M-1M1K020H-S2 |
| 7.16 Nm | 1.5 kW | R88D-1SN15H-ECT | R88M-1M1K520H-S2 | |||||
| With brake | 4.77 Nm | 1 kW | R88D-1SN15H-ECT | R88M-1M1K020H-BS2 | ||||
| 7.16 Nm | 1.5 kW | R88D-1SN15H-ECT | R88M-1M1K520H-BS2 | |||||
| Absolute encoder (23-bit)Straight shaft with key and tap |
Without brake | 4.77 Nm | 1 kW | R88D-1SN15H-ECT | R88M-1M1K020T-S2 | |||
| 7.16 Nm | 1.5 kW | R88D-1SN15H-ECT | R88M-1M1K520T-S2 | |||||
| With brake | 4.77 Nm | 1 kW | R88D-1SN15H-ECT | R88M-1M1K020T-BS2 | ||||
| 7.16 Nm | 1.5 kW | R88D-1SN15H-ECT | R88M-1M1K520T-BS2 | |||||
| 400 V | Without brake | 1.91 Nm | 400 W | 100 mm | R88D-1SN06F-ECT | R88M-1M40020C-S2 | ||
| 2.86 Nm | 600 W | R88D-1SN06F-ECT | R88M-1M60020C-S2 | |||||
| 4.77 Nm | 1 kW | 130 mm | R88D-1SN10F-ECT | R88M-1M1K020C-S2 | ||||
| 7.16 Nm | 1.5 kW | R88D-1SN15F-ECT | R88M-1M1K520C-S2 | |||||
| 9.55 Nm | 2 kW | R88D-1SN20F-ECT | R88M-1M2K020C-S2 | |||||
| 14.3 Nm | 3 kW | R88D-1SN30F-ECT | R88M-1M3K020C-S2 | |||||
| With brake | 1.91 Nm | 400 W | 100 mm | R88D-1SN06F-ECT | R88M-1M40020C-BS2 | |||
| 2.86 Nm | 600 W | R88D-1SN06F-ECT | R88M-1M60020C-BS2 | |||||
| 4.77 Nm | 1 kW | 130 mm | R88D-1SN10F-ECT | R88M-1M1K020C-BS2 | ||||
| 7.16 Nm | 1.5 kW | R88D-1SN15F-ECT | R88M-1M1K520C-BS2 | |||||
| 9.55 Nm | 2 kW | R88D-1SN20F-ECT | R88M-1M2K020C-BS2 | |||||
| 14.3 Nm | 3 kW | R88D-1SN30F-ECT | R88M-1M3K020C-BS2 | |||||
Servo motors 1000 r/min (900 W to 3 kW)
| Symbol | Specifications | Compatible 1S servo drive | Order code | |||||
|---|---|---|---|---|---|---|---|---|
| Voltage | Encoder and design | Rated torque | Capacity | Flange size | ||||
| ① | 230 V | Absolute encoder (23-bit)Straight shaft with key and tap |
Without brake | 8.59 Nm | 900 W | 130 mm | R88D-1SN15H-ECT | R88M-1M90010T-S2 |
| With brake | 8.59 Nm | 900 W | R88D-1SN15H-ECT | R88M-1M90010T-BS2 | ||||
| 400 V | Without brake | 8.59 Nm | 900 W | R88D-1SN10F-ECT | R88M-1M90010C-S2 | |||
| 19.1 Nm | 2 kW | 180 mm | R88D-1SN20F-ECT | R88M-1M2K010C-S2 | ||||
| 28.7 Nm | 3 kW | R88D-1SN30F-ECT | R88M-1M3K010C-S2 | |||||
| With brake | 8.59 Nm | 900 W | 130 mm | R88D-1SN10F-ECT | R88M-1M90010C-BS2 | |||
| 19.1 Nm | 2 kW | 180 mm | R88D-1SN20F-ECT | R88M-1M2K010C-BS2 | ||||
| 28.7 Nm | 3 kW | R88D-1SN30F-ECT | R88M-1M3K010C-BS2 | |||||
Encoder cables
| Symbol | Appearance | Specifications | Order code | |
|---|---|---|---|---|
| ③ |
|
Encoder cable for servo motors R88M-1M05030T-_ R88M-1M(100/200/400/750)30(H/T)-_ |
1.5 m | R88A-CR1A001-5CF-E |
| 3 m | R88A-CR1A003CF-E | |||
| 5 m | R88A-CR1A005CF-E | |||
| 10 m | R88A-CR1A010CF-E | |||
| 15 m | R88A-CR1A015CF-E | |||
| 20 m | R88A-CR1A020CF-E | |||
|
Encoder cable for servo motors R88M-1L(1K0/1K5)30(H/T)-_ R88M-1L(750/1K0/1K5/2K0/3K0)30C-_ R88M-1M(1K0/1K5)20(H/T)-_ R88M-1M(400/600/1K0/1K5/2K0/3K0)20C-_ R88M-1M90010T-_ R88M-1M(900/2K0/3K0)10C-_ |
1.5 m | R88A-CR1B001-5NF-E | |
| 3 m | R88A-CR1B003NF-E | |||
| 5 m | R88A-CR1B005NF-E | |||
| 10 m | R88A-CR1B010NF-E | |||
| 15 m | R88A-CR1B015NF-E | |||
| 20 m | R88A-CR1B020NF-E | |||
Power cables
| Symbol | Appearance | Specifications | Order code | ||
|---|---|---|---|---|---|
| ④ |  |
For 230 V servo motors R88M-1M05030T-_S2 For servo motors with brake R88M-1M05030T-BS2, the separate brake cable R88A-CA1A___BFR is needed. |
Without brake |
3 m | R88A-CA1A003SFR |
| 5 m | R88A-CA1A005SFR | ||||
| 10 m | R88A-CA1A010SFR | ||||
| 15 m | R88A-CA1A015SFR | ||||
| 20 m | R88A-CA1A020SFR | ||||
 |
For 230 V servo motors R88M-1M(100/200/400/750)30(H/T)-_S2 For servo motors with brake R88M-1M(100/200/400/750)30(H/T)-BS2, the separate brake cable R88A-CA1A___BF-E is needed. |
Without brake |
1.5 m | R88A-CA1A001-5SF-E | |
| 3 m | R88A-CA1A003SF-E | ||||
| 5 m | R88A-CA1A005SF-E | ||||
| 10 m | R88A-CA1A010SF-E | ||||
| 15 m | R88A-CA1A015SF-E | ||||
| 20 m | R88A-CA1A020SF-E | ||||
 |
For 230 V servo motors R88M-1L(1K0/1K5)30(H/T)-_S2 R88M-1M(1K0/1K5)20(H/T)-_S2 R88M-1M90010T-_S2 |
Without brake |
1.5 m | R88A-CA1C001-5SF-E | |
| 3 m | R88A-CA1C003SF-E | ||||
| 5 m | R88A-CA1C005SF-E | ||||
| 10 m | R88A-CA1C010SF-E | ||||
| 15 m | R88A-CA1C015SF-E | ||||
| 20 m | R88A-CA1C020SF-E | ||||
 |
With brake | 1.5 m | R88A-CA1C001-5BF-E | ||
| 3 m | R88A-CA1C003BF-E | ||||
| 5 m | R88A-CA1C005BF-E | ||||
| 10 m | R88A-CA1C010BF-E | ||||
| 15 m | R88A-CA1C015BF-E | ||||
| 20 m | R88A-CA1C020BF-E | ||||
|
For 400 V servo motors R88M-1L(750/1K0/1K5/2K0)30C-_S2 R88M-1M(400/600/1K0/1K5/2K0)20C-_S2 R88M-1M90010C-_S2 |
Without brake |
1.5 m | R88A-CA1C001-5SF-E | |
| 3 m | R88A-CA1C003SF-E | ||||
| 5 m | R88A-CA1C005SF-E | ||||
| 10 m | R88A-CA1C010SF-E | ||||
| 15 m | R88A-CA1C015SF-E | ||||
| 20 m | R88A-CA1C020SF-E | ||||
 |
With brake | 1.5 m | R88A-CA1E001-5BF-E | ||
| 3 m | R88A-CA1E003BF-E | ||||
| 5 m | R88A-CA1E005BF-E | ||||
| 10 m | R88A-CA1E010BF-E | ||||
| 15 m | R88A-CA1E015BF-E | ||||
| 20 m | R88A-CA1E020BF-E | ||||
| ④ |  |
For 400 V servo motors R88M-1L3K030C-_S2 R88M-1M3K020C-_S2 R88M-1M(2K0/3K0)10C-_S2 |
Without brake |
1.5 m | R88A-CA1E001-5SF-E |
| 3 m | R88A-CA1E003SF-E | ||||
| 5 m | R88A-CA1E005SF-E | ||||
| 10 m | R88A-CA1E010SF-E | ||||
| 15 m | R88A-CA1E015SF-E | ||||
| 20 m | R88A-CA1E020SF-E | ||||
|
With brake | 1.5 m | R88A-CA1E001-5BF-E | ||
| 3 m | R88A-CA1E003BF-E | ||||
| 5 m | R88A-CA1E005BF-E | ||||
| 10 m | R88A-CA1E010BF-E | ||||
| 15 m | R88A-CA1E015BF-E | ||||
| 20 m | R88A-CA1E020BF-E | ||||
Brake cables (for 230 V, 50 W to 750 W servo motors)
| Symbol | Appearance | Specifications | Order code | |
|---|---|---|---|---|
| ④ |  |
Brake cable only For 230 V servo motors with brake R88M-1M05030T-BS2 |
3 m | R88A-CA1A003BFR |
| 5 m | R88A-CA1A005BFR | |||
| 10 m | R88A-CA1A010BFR | |||
| 15 m | R88A-CA1A015BFR | |||
| 20 m | R88A-CA1A020BFR | |||
 |
Brake cable only For 230 V servo motors with brake R88M-1M(100/200/400/750)30(H/T)-BS2 |
1.5 m | R88A-CA1A001-5BF-E | |
| 3 m | R88A-CA1A003BF-E | |||
| 5 m | R88A-CA1A005BF-E | |||
| 10 m | R88A-CA1A010BF-E | |||
| 15 m | R88A-CA1A015BF-E | |||
| 20 m | R88A-CA1A020BF-E | |||
Connectors for encoder, power and brake cables
| Specifications | Applicable servo motor | Order code | |
|---|---|---|---|
| Connectors for encoder cables | Drive side (CN2) | All models | R88A-CN101R |
| Motor side | R88M-1M05030T-_ R88M-1M(100/200/400/750)30(H/T)-_ |
R88A-CNK02R | |
| R88M-1L(1K0/1K5)30(H/T)-_ R88M-1L(750/1K0/1K5/2K0/3K0)30C-_ R88M-1M(1K0/1K5)20(H/T)-_ R88M-1M(400/600/1K0/1K5/2K0/3K0)20C-_ R88M-1M90010T-_ R88M-1M(900/2K0/3K0)10C-_ |
R88A-CN104R | ||
| Connectors for power cables | Motor side | R88M-1M(100/200/400/750)30(H/T)-_S2 | R88A-CN111A |
| R88M-1L(1K0/1K5)30(H/T)-S2 R88M-1M(1K0/1K5)20(H/T)-S2 R88M-1M90010T-S2 R88M-1L(750/1K0/1K5/2K0)30C-S2 R88M-1M(400/600/1K0/1K5/2K0)20C-S2 R88M-1M90010C-S2 |
MS3108E20-4S | ||
| R88M-1L(1K0/1K5)30(H/T)-BS2 R88M-1M(1K0/1K5)20(H/T)-BS2 R88M-1M90010T-BS2 |
MS3108E20-18S | ||
| R88M-1L3K030C-S2 R88M-1M3K020C-S2 R88M-1M(2K0/3K0)10C-S2 |
MS3108E22-22S | ||
| R88M-1L(750/1K0/1K5/2K0/3K0)30C-BS2 R88M-1M(400/600/1K0/1K5/2K0/3K0)20C-BS2 R88M-1M(900/2K0/3K0)10C-BS2 |
MS3108E24-11S | ||
| Connectors for brake cables | Motor side | R88M-1M(100/200/400/750)30(H/T)-BS2 | R88A-CN111B |
Cable clamp (spare parts)
| Applicable 1S power cable | Order code |
|---|---|
| 230 V, 100 W to 750 W models | R88A-SC011S-E |
230 V, 1.5 kW model 400 V, 600 W to 3 kW models |
R88A-SC021S-E |
Dimensions
Servo motors
Type 3000 r/min motors (230 V, 50 W)
| Dimensions (mm) | Without brake | With brake | Approx. mass (kg) | |
|---|---|---|---|---|
| Model: R88M-1_ | LL | LL | Without brake | With brake |
| M05030T-_S2 | 67.5 | 103.5 | 0.35 | 0.59 |
Type 3000 r/min motors (230 V, 100 W)
| Dimensions (mm) | Without brake | With brake | Approx. mass (kg) | |
|---|---|---|---|---|
| Model: R88M-1_ | LL | LL | Without brake | With brake |
| M10030(H/T)-_S2 | 90 | 126 | 0.52 | 0.77 |
Type 3000 r/min motors (230 V, 200 W to 750 W)
| Dimensions (mm) | Without brake | With brake | LR | Flange surface | Shaft end | Approx. mass (kg) | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Model: R88M-1_ | LL | KL1 | LL | KL1 | LB | LC | LD | LG | LZ | S | QA | QK | W | U | T | Tap x depth | Without brake |
With brake |
|
| M20030(H/T)-_S2 | 79.5 | 52.6 | 107.5 | 52.6 | 30 | 50 dia. 0-0.025 | 60 | 70 | 6 | 4.5 | 11 dia. 0-0.011 | 2 | 20 | 4 0-0.03 | 1.5 0-0.2 | 4 | M4 x 10L | 1.0 | 1.3 |
| M40030(H/T)-_S2 | 105.5 | 133.5 | 14 dia. 0-0.011 | 5 0-0.03 | 2 0-0.2 | 5 | M5 x 12L | 1.4 | 1.9 | ||||||||||
| M75030(H/T)-_S2 | 117.3 | 63.2 | 153 | 63.2 | 35 | 70 dia. 0-0.03 | 80 | 90 | 8 | 6 | 19 dia. 0-0.013 | 3 | 24 | 6 0-0.03 | 2.5 0-0.2 | 6 | 2.9 | 3.9 | |
Type 3000 r/min motors (230 V, 1 kW to 1.5 kW / 400 V, 750 W to 3 kW)
| Dimensions (mm) |
Without brake | With brake | LR | Flange surface | Shaft end | Approx. mass (kg) |
||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Model: R88M-1_ |
LL | KB1 | KB2 | KL1 | LL | KB1 | KB2 | KL1 | LB | LC | LD | LE | LG | LZ | S | QA | QK | W | U | T | Tap x depth |
Without brake |
With brake |
|
| L1K030(H/T)-_S2 | 168 | 85 | 153 | 97 | 209 | 85 | 194 | 97 | 55 | 95 dia. 0-0.035 | 100 | 115 | 3 | 10 | 9 | 19 dia. 0-0.013 | 3 | 42 | 6 0-0.03 | 2.5 0-0.2 | 6 | M5 x 12L | 5.7 | 7.4 |
| L1K530(H/T)-_S2 | ||||||||||||||||||||||||
| L75030C-_S2 | 139 | 56 | 124 | 180 | 56 | 165 | 104 | 4.1 | 5.8 | |||||||||||||||
| L1K030C-_S2 | 168 | 85 | 153 | 209 | 85 | 194 | 5.7 | 7.4 | ||||||||||||||||
| L1K530C-_S2 | ||||||||||||||||||||||||
| L2K030C-_S2 | 179 | 96 | 164 | 220 | 96 | 205 | 6.4 | 8.1 | ||||||||||||||||
| L3K030C-_S2 | 184 | 112 | 169 | 116 | 230 | 112 | 215 | 119 | 110 dia. 0-0.035 | 130 | 145 | 4 | 12 | 9 | 22 dia. 0-0.013 | 8 0-0.036 | 3 0-0.4 | 7 | 11.5 | 12.5 | ||||
Type 2000 r/min motors (400 V, 400 W to 600 W)
| Dimensions (mm) | Without brake | With brake | Approx. mass (kg) | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Model: R88M-1_ | LL | KB1 | KB2 | KL1 | LL | KB1 | KB2 | KL1 | Without brake | With brake |
| M40020C-_S2 | 134.8 | 52 | 120.5 | 97 | 152.3 | 52 | 138 | 104 | 3.9 | 4.8 |
| M60020C-_S2 | 151.8 | 69 | 137.5 | 169.3 | 69 | 155 | 4.7 | 5.8 | ||
Type 2000 r/min motors (230 V, 1 kW to 1.5 kW / 400 V, 1 kW to 3 kW)
| Dimensions (mm) | Without brake | With brake | LR | Shaft end | Approx. mass (kg) | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Model: R88M-1_ | LL | KB1 | KB2 | KL1 | KL2 | LL | KB1 | KB2 | KL1 | KL2 | S | Q | QA | QK | W | U | T | Tap xdepth | Without brake | Withbrake | |
| M1K020(H/T)-_S2 | 120.5 | 63 | 109 | 76 | 118 | 162 | 63 | 149 | 76 | 118 | 55 | 22 dia. 0-0.013 | 50 | 3 | 42 | 8 0-0.036 | 3 0-0.4 | 7 | M5 x 12L | 6.6 | 8.6 |
| M1K520(H/T)-_S2 | 138 | 79 | 125 | 179 | 79 | 166 | 8.5 | 10.5 | |||||||||||||
| M1K020C-_S2 | 120.5 | 63 | 109 | 162 | 64 | 150 | 119 | 6.6 | 8.6 | ||||||||||||
| M1K520C-_S2 | 138 | 79 | 125 | 179 | 81 | 167 | 8.5 | 10.5 | |||||||||||||
| M2K020C-_S2 | 160 | 98 | 148 | 201 | 99 | 189 | 10.0 | 12.0 | |||||||||||||
| M3K020C-_S2 | 191 | 119 | 176 | 45 | 116 | 234 | 118 | 219 | 45 | 119 | 65 | 24 dia. 0-0.013 | 60 | 52 | M8 x 20L | 12.0 | 15.0 | ||||
Type 1000 r/min motors (230 V, 900 W / 400 V, 900 W)
| Dimensions (mm) | Without brake | With brake | Approx. mass (kg) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Model: R88M-1_ | LL | KB1 | KB2 | KL1 | KL2 | LL | KB1 | KB2 | KL1 | KL2 | Without brake | With brake |
| M90010T-_S2 | 138 | 79 | 125 | 76 | 118 | 179 | 79 | 166 | 76 | 118 | 8.5 | 10.5 |
| M90010C-_S2 | 81 | 167 | 117 | |||||||||
Type 1000 r/min motors (400 V, 2 kW)
| Dimensions (mm) | Without brake | With brake | Approx. mass (kg) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Model: R88M-1_ | LL | KB1 | KB2 | KL1 | KL2 | LL | KB1 | KB2 | KL1 | KL2 | Without brake | With brake |
| M2K010C-_S2 | 159 | 93 | 145 | 45 | 141 | 206 | 92 | 191 | 45 | 144 | 18.0 | 22.0 |
Type 1000 r/min motors (400 V, 3 kW)
| Dimensions (mm) | Without brake | With brake | Approx. mass (kg) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Model: R88M-1_ | LL | KB1 | KB2 | KL1 | KL2 | LL | KB1 | KB2 | KL1 | KL2 | Without brake | With brake |
| M3K010C-_S2 | 228 | 162 | 213 | 45 | 141 | 274 | 162 | 260 | 45 | 144 | 28.0 | 33.0 |
Sysmac Studio
Sysmac Studio — это единая среда разработки и эксплуатации, предоставляющая функции конфигурирования, программирования, моделирования и мониторинга.
Брошюры
Показать все Брошюры
Каталоги
Спецификации
Показать все Спецификации
Технические руководства
Показать все Технические руководства
Программное обеспечение
Показать все Программное обеспечение
Подписаться на новости и обновления о продуктах
Подпишитесь на новостную рассылку и получайте новости о разработках продукции, решениях и услугах прямо на свой почтовый ящик.
Благодарим Вас за подписку на Omron eNews. В ближайшее время на электронный адрес, который Вы указали при регистрации, будет выслано уведомление о подтверждении подписки. Чтобы подтвердить подписку, проследуйте указанной в письме ссылке. Данная процедура необходима для соблюдения существующих правовых норм и в целях предотвращения возможного злоупотребления Вашим электронным адресом третьими лицами.
Возникли технические проблемы. Ваша форма не была отправлена. Примите наши извинения и повторите попытку позже. Детали: [details]
DownloadОбучающие курсы
Пройти обучающие курсы от наших лучших специалистов. От начального до продвинутого уровня.
Просмотреть обучающие курсы