Серия миниатюрных силовых реле MY

Библиотека дву-/трехмерных CAD рисунков
MY(S) Miniature Power Relays Спецификация

Особенности

Самые популярные реле общего назначения для любых условий эксплуатации и любой области применения

Все модели^* семейства MY оснащены такими стандартными функциями, как прозрачная крышка, механический индикатор для простоты проверки состояния контактов и светодиодный индикатор, отслеживающий правильность работы реле, а также моментально определяющий тип напряжения обмотки: красный светодиод для переменного тока и зеленый для постоянного.
Снижение нагрева благодаря контактам шириной 2,6 мм, обеспечивающим повышение проводимости
В зависимости от области применения можно выбрать модели с различными характеристиками, например с индикаторами работы или с рычагами фиксации (штепсельные разъемы MY).
Объем работ по коммутации может быть сокращен на 60%^** по сравнению с традиционными винтовыми клеммными колодками. Сочетание MY с клеммными колодками Push-In Plus (PYF-[]-PU) обеспечивает небольшое усилие для вставки и позволяет сократить время коммутации.

^{* Не включая особые модели}

^{** В случае, если и клеммы Push-In Plus, и винтовые клеммные колодки сочетаются с разъемами штепсельного типа}

Характеристики и информация для заказа

Ordering information

Miniature Power Relays: MY(S)

Terminal type	Feature	Classification	Number of poles	Contacts	Rated voltage	Order code
Plug-in Terminals	Without operation indicator	Standard models (compliant with Electrical Appliances and Material Safety Act)	2	Single	12, 24, 100/110, 110/120, 200/220, 220/240 VAC	MY2
				Single	12, 24, 48, 100/110 VDC	MY2
				Bifurcated	12, 24, 100/110, 110/120, 200/220, 220/240 VAC	MY2Z
				Bifurcated	12, 24, 48, 100/110 VDC	MY2Z
			3	Single	12, 24, 100/110, 110/120, 200/220, 220/240 VAC	MY3
			3	Single	12, 24, 48, 100/110 VDC	MY3
			4	Single	12, 24, 100/110, 110/120, 200/220, 220/240 VAC	MY4
				Single	12, 24, 48, 100/110 VDC	MY4
				Bifurcated	100/110, 110/120, 200/220, 220/240 VAC	MY4Z
				Bifurcated	12, 24, 48, 100/110 VDC	MY4Z
				Crossbar bifurcated	100/110, 110/120, 200/220 VAC	MY4Z-CBG
				Crossbar bifurcated	12, 24, 48, 100/110 VDC	MY4Z-CBG
		Models with built-in diode for coil surge absorption (DC coil specification only)	2	Single	12, 24, 48, 100/110 VDC	MY2-D
			2	Bifurcated	12, 24, 100/110 VDC	MY2Z-D
			3	Single	12, 24, 100/110 VDC	MY3-D
			4	Single	12, 24, 48, 100/110 VDC	MY4-D
			4	Bifurcated	12, 24, 48, 100/110 VDC	MY4Z-D
		Models with built-in CR circuit for coil surge absorption (AC coil specification only)	2	Single	100/110, 110/120, 200/220, 220/240 VAC	MY2-CR
			2	Bifurcated	100/110, 200/220 VAC,	MY2Z-CR
			4	Single	100/110, 110/120, 200/220, 220/240 VAC	MY4-CR
			4	Bifurcated	100/110, 110/120, 200/220, 220/240 VAC	MY4Z-CR
	With operation indicator	Standard models (compliant with Electrical Appliances and Material Safety Act)	2	Single	12, 24, 100/110, 110/120, 200/220, 220/240 VAC	MY2N
				Single	12, 24, 48, 100/110 VDC	MY2N
				Bifurcated	12, 24, 100/110, 110/120, 200/220, 220/240 VAC	MY2ZN
				Bifurcated	12, 24, 48, 100/110 VDC	MY2ZN
			3	Single	12, 24, 100/110, 110/120, 200/220, 220/240 VAC	MY3N
			3	Single	12, 24, 48, 100/110 VDC	MY3N
			4	Single	12, 24, 100/110, 110/120, 200/220, 220/240 VAC	MY4N
				Single	12, 24, 48, 100/110 VDC	MY4N
				Bifurcated	24, 100/110, 110/120, 200/220, 220/240 VAC	MY4ZN
				Bifurcated	12, 24, 48, 100/110 VDC	MY4ZN
				Crossbar bifurcated	100/110, 200/220 VAC	MY4ZN-CBG
				Crossbar bifurcated	24 VDC	MY4ZN-CBG
		Models with built-in diode for coil surge absorption (DC coil specification only)	2	Single	12, 24, 48, 100/110 VDC	MY2N-D2
			2	Bifurcated	12, 24, 100/110 VDC	MY2ZN-D2
			3	Single	12, 24, 100/110 VDC	MY3N-D2
			4	Single	12, 24, 48, 100/110 VDC	MY4N-D2
			4	Bifurcated	12, 24, 48, 100/110 VDC	MY4ZN-D2
		Models with built-in CR circuit for coil surge absorption (AC coil specification only)	2	Single	100/110, 110/120, 200/220, 220/240 VAC	MY2N-CR
			4	Single	100/110, 110/120, 200/220, 220/240 VAC	MY4N-CR
			4	Bifurcated	100/110, 110/120, 200/220, 220/240 VAC	MY4ZN-CR
Plug-in Terminals	With operation indicator/-latching lever	Standard models (compliant with Electrical Appliances and Material Safety Act)	2	Single	100/110, 200/220 VAC	MY2IN(S)
			2	Single	12, 24, 48 VDC	MY2IN(S)
			4	Single	100/110, 200/220 VAC	MY4IN(S)
				Single	12, 24, 48 VDC	MY4IN(S)
				Bifurcated	100/110, 200/220 VAC	MY4ZIN(S)
				Bifurcated	12, 24, 48 VDC	MY4ZIN(S)
		Models with built-in diode for coil surge absorption (DC coil specification only)	2	Single	12, 24, 48 VDC	MY2IN-D2(S)
			4	Single	12, 24, 48 VDC	MY4IN-D2(S)
			4	Bifurcated	12, 24, 48 VDC	MY4ZIN-D2(S)
		Models with built-in CR circuit for coil surge absorption (AC coil specification only)	4	Single	100/110, 200/220 VAC	MY4IN-CR(S)
			4	Bifurcated	100/110, 200/220 VAC	MY4ZIN-CR(S)
PCB terminals	–	Standard models (compliant with Electrical Appliances and Material Safety Act)	2	Single	12, 24, 100/110, 110/120, 200/220, 220/240 VAC	MY2-02
			2	Single	12, 24, 48, 100/110 VDC	MY2-02
			3	Single	12, 24, 100/110, 110/120, 200/220, 220/240 VAC	MY3-02
			3	Single	12, 24, 48, 100/110 VDC	MY3-02
			4	Single	12, 24, 100/110, 110/120, 200/220, 220/240 VAC	MY4-02
				Single	12, 24, 48, 100/110 VDC	MY4-02
				Bifurcated	100/110, 110/120, 200/220 VAC	MY4Z-02
				Bifurcated	12, 24, 48, 100/110 VDC	MY4Z-02
Case-surface mounting			2	Single	24, 100/110, 110/120, 200/220, 220/240 VAC	MY2F
			2	Single	12, 24, 48, 100/110 VDC	MY2F
			3	Single	24, 100/110, 200/220 VAC	MY3F
			3	Single	24, 100/110 VDC	MY3F
			4	Single	24, 100/110, 110/120, 200/220 VAC	MY4F
				Single	12, 24, 48, 100/110 VDC	MY4F
				Bifurcated	200/220 VAC	MY4ZF
				Bifurcated	12, 24 VDC	MY4ZF

Miniature Power Latching Relays: MYK

Terminal type	Feature	Classification	Number of poles	Contacts	Rated voltage	Order code
Plug-in Terminals	–	Standard models (compliant with Electrical Appliances and Material Safety Act)	2	Single	12, 24, 100, 100/110 VAC	MY2K
Plug-in Terminals				Single	12, 24, 48 VDC	MY2K
PCB terminals				Single	24, 100 VAC	MY2K-02
PCB terminals				Single	12, 24 VDC	MY2K-02

Miniature Power Sealed Relays: MYQ/MYH

Plastic Sealed Relays: MYQ

Terminal type	Feature	Classification	Number of poles	Contacts	Rated voltage	Order code
Plug-in Terminals	Without operation indicator	Standard models (compliant with Electrical Appliances and Material Safety Act)	4	Single	100/110, 110/120, 200/220, 220/240 VAC	MYQ4
				Single	24 VDC	MYQ4
				Bifurcated	100/110, 110/120, 200/220 VAC	MYQ4Z
				Bifurcated	12, 24 VDC	MYQ4Z
	With operation indicator			Single	24, 100/110, 110/120, 200/220, 220/240 VAC	MYQ4N
	With operation indicator			Single	12, 24, 48, 100/110 VDC	MYQ4N
PCB terminals	–		4	Single	50, 200/220, 220/240 VAC	MYQ4-02
				Single	24 VDC	MYQ4-02
				Bifurcated	100/110 VAC	MYQ4Z-02
				Bifurcated	24, 48 VDC	MYQ4Z-02

Hermetically Sealed Relays: MYH

Terminal type	Feature	Classification	Number of poles	Contacts	Rated voltage	Order code
Plug-in Terminals	–	Standard models (compliant with Electrical Appliances and Material Safety Act)	4	Single	24, 100/110, 110/120 VAC	MY4H
				Single	12, 24, 48, 100/110 VDC	MY4H
				Bifurcated	24, 100/110, 110/120 VAC	MY4ZH
				Bifurcated	12, 24, 48, 100/110 VDC	MY4ZH
PCB terminals			4	Single	110/120 VAC	MY4H-0
				Single	24 VDC	MY4H-0
				Bifurcated	24, 100/110 VDC	MY4ZH-0

Miniature Power Relays: MY-GS

Classification	Number of poles	Rated voltage (V)	Order code
Standard model without operation indicator	2	12, 24, 48, 100/110, 110/120, 200/220, 220/240 VAC 6, 12, 24, 48, 100/110 VDC	MY2-GS
Standard model without operation indicator	4	12, 24, 48, 100/110, 110/120, 200/220, 220/240 VAC 6, 12, 24, 48, 100/110 VDC	MY4-GS
Standard model with operation indicator	2	12, 24, 48, 100/110, 110/120, 200/220, 220/240 VAC 6, 12, 24, 48, 100/110, 220 VDC	MY2N-GS
Standard model with operation indicator	4	12, 24, 48, 100/110, 110/120, 200/220, 220/240 VAC 6, 12, 24, 48, 100/110, 220 VDC	MY4N-GS
Standard model with operation indicator and latching lever	2	12, 24, 48, 100/110, 110/120, 200/220, 220/240 VAC 6, 12, 24, 48, 100/110, 220 VDC	MY2IN-GS
Standard model with operation indicator and latching lever	4	12, 24, 48, 100/110, 110/120, 200/220, 220/240 VAC 6, 12, 24, 48, 100/110, 220 VDC	MY4IN-GS
Models with built-in diodes for coil surge absorption with operation indicator	2	12, 24, 48, 100/110, 220 VDC	MY2N-D2-GS
	4	12, 24, 48, 100/110, 220 VDC	MY4N-D2-GS
Models with built-in diodes for coil surge absorption with operation indicator and latching lever	2	12, 24, 48, 100/110, 220 VDC	MY2IN-D2-GS
	4	12, 24, 48, 100/110, 220 VDC	MY4IN-D2-GS
Models with built-in CR circuits for coil surge absorption with operation indicator	2	100/110, 110/120, 200/220, 220/240 VAC	MY2N-CR-GS
	4	100/110, 110/120, 200/220, 220/240 VAC	MY4N-CR-GS
Models with built-in CR circuits for coil surge absorption with operation indicator and latching lever	2	100/110, 110/120, 200/220, 220/240 VAC	MY2IN-CR-GS
	4	100/110, 110/120, 200/220, 220/240 VAC	MY4IN-CR-GS

Specifications

Miniature Power Relays: MY(S)

Operating Coils Ratings

Terminal Type	Classification	Number of poles	Contacts	Without operation indicator	With operation indicator
Plug-in terminals	Standard models	2	Single	MY2	MY2N
		4	Single	MY4	MY4N
		4	Bifurcated	MY4Z	MY4ZN
	Models with built-in diode for coil surge absorption (DC coil specification only)	2	Single	MY2-D	MY2N-D2
		4	Single	MY4-D	MY4N-D2
		4	Bifurcated	MY4Z-D	MY4ZN-D2
	Models with built-in CR circuit for coil surge absorption (AC coil specification only)	2	Single	MY2-CR	MY2N-CR
		4	Single	MY4-CR	MY4N-CR
		4	Bifurcated	MY4Z-CR	MY4ZN-CR

Item		Rated current (mA)		Coil resistance (Ω)	Coil inductance (H)		Must operate voltage (V)	Must release voltage (V)	Maximum voltage (V)	Power consumption (VA, W)
Rated voltage (V)		50 Hz	60 Hz	Coil resistance (Ω)	Armature OFF	Armature ON	Must operate voltage (V)	Must release voltage (V)	Maximum voltage (V)	Power consumption (VA, W)
AC	12	106.5	91	46	0.17	0.33	80% max. 2 There is variation between products, but actual values are 80% maximum. To ensure operation, apply at least 80% of the rated value (at a coil temperature of 23°C).	30% min. 2 There is variation between products, but actual values are 10% minimum for DC. To ensure release, use a value that is lower than the specified value.	110% of rated voltage	Approx. 0.9 to 1.3 (at 60 Hz)
	24	53.8	46	180	0.69	1.3
	100/110	11.7/12.9	10/11	3,750	14.54	24.6
	110/120	9.9/10.8	8.4/9.2	4,430	19.2	32.1
	200/220	6.2/6.8	5.3/5.8	12,950	54.75	94.07
	220/240	4.8/5.3	4.2/4.6	18,790	83.5	136.4
DC	12	72.7		165	0.73	1.37		10% min. 2 There is variation between products, but actual values are 10% minimum for DC. To ensure release, use a value that is lower than the specified value.		Approx. 0.9
	24	36.3		662	3.2	5.72
	48	17.6		2,725	10.6	21.0
	100/110	8.7/9.6		11,440	45.6	86.2

Note:

The rated current and coil resistance are measured at a coil temperature of 23°C with tolerances of +15%/–20% for AC rated current and ±15% for DC coil resistance.
The AC coil resistance and inductance values are reference values only (at 60 Hz).
Operating characteristics were measured at a coil temperature of 23°C.
The maximum voltage capacity was measured at an ambient temperature of 23°C.

Terminal Type	Classification	Number of poles	Contacts	Without operation indicator	With operation indicator
Plug-in terminals	Standard models	2	Bifurcated	MY2Z	MY2ZN
Plug-in terminals	Models with built-in diode for coil surge absorption (DC coil specification only)	2	Bifurcated	MY2Z-D	MY2ZN-D2

Item		Rated current (mA)		Coil resistance (Ω)	Coil inductance (H)		Must operate voltage (V)	Must release voltage (V)	Maximum voltage (V)	Power consumption (VA, W)
Rated voltage (V)		50 Hz	60 Hz	Coil resistance (Ω)	Armature OFF	Armature ON	Must operate voltage (V)	Must release voltage (V)	Maximum voltage (V)	Power consumption (VA, W)
AC	12	106.5	91	46	0.17	0.33	80% max. 2 There is variation between products, but actual values are 80% maximum. To ensure operation, apply at least 80% of the rated value.	30% min 2 There is variation between products, but actual values are 10% minimum for DC. To ensure release, use a value that is lower than the specified value.	110% of rated voltage	Approx. 0.9 to 1.3 (at 60 Hz)
	24	53.8	46	180	0.69	1.3
	100/110	11.7/12.9	10/11	3,750	14.54	24.6
	110/120	9.9/10.8	8.4/9.2	4,430	19.2	32.1
	200/220	6.2/6.8	5.3/5.8	12,950	54.75	94.07
	220/240	4.8/5.3	4.2/4.6	18,790	83.5	136.4
DC	12	75		160	0.73	1.37		10% min. 2 There is variation between products, but actual values are 10% minimum for DC. To ensure release, use a value that is lower than the specified value.		Approx. 0.9
	24	36.9		650	3.2	5.72
	48	18.5		2,600	10.6	21.0
	100/110	9.1/10		11,000	45.6	86.2

Note:

The rated current and coil resistance are measured at a coil temperature of 23°C with tolerances of +15%/–20% for AC rated current and ±15% for DC coil resistance.
The AC coil resistance and inductance values are reference values only (at 60 Hz).
Operating characteristics were measured at a coil temperature of 23°C.
The maximum voltage capacity was measured at an ambient temperature of 23°C.

Terminal Type	Classification	Number of poles	Contacts	With latching lever
Plug-in terminals	Standard models	2	Single	MY2IN(S)
		4	Single	MY4IN(S)
		4	Bifurcated	MY4ZIN(S)
	Models with built-in diode for coil surge absorption (DC coil specification only)	2	Single	MY2IN-D2(S)
		4	Single	MY4IN-D2(S)
		4	Bifurcated	MY4ZIN-D2(S)
	Models with built-in CR circuit for coil surge absorption (AC coil specification only)	2	Single	MY4IN-CR(S)
		4	Bifurcated	MY4ZIN-CR(S)

Item		Rated current (mA)		Coil resistance (Ω)	Coil inductance (H)		Must operate voltage (V)	Must release voltage (V)	Maximum voltage (V)	Power consumption (VA, W)
Rated voltage (V)		50 Hz	60 Hz	Coil resistance (Ω)	Armature OFF	Armature ON	Must operate voltage (V)	Must release voltage (V)	Maximum voltage (V)	Power consumption (VA, W)
AC	100/110	11.7/12.9	10/11	3,750	14.54	24.6	80% max. 2 There is variation between products, but actual values are 80% maximum. To ensure operation, apply at least 80% of the rated value.	30% min. 2 There is variation between products, but actual values are 10% minimum for DC. To ensure release, use a value that is lower than the specified value.	110% of rated voltage	Approx. 0.9 to 1.3 (at 60 Hz)
AC	200/220	6.2/6.8	5.3/5.8	12,950	54.75	94.07				Approx. 0.9 to 1.3 (at 60 Hz)
DC	12	75		160	0.73	1.37		10% min. 2 There is variation between products, but actual values are 10% minimum for DC. To ensure release, use a value that is lower than the specified value.		Approx. 0.9
	24	37.7		636	3.2	5.72
	48	18.8		2,560	10.6	21

Note:

The rated current and coil resistance are measured at a coil temperature of 23°C with tolerances of +15%/–20% for AC rated current and ±15% for DC coil resistance.
The AC coil resistance and inductance values are reference values only (at 60 Hz).
Operating characteristics were measured at a coil temperature of 23°C.
The maximum voltage capacity was measured at an ambient temperature of 23°C.

Terminal Type	Classification	Number of poles	Contacts	Without operation indicator	With operation indicator
Plug-in terminals	Standard models	3	Single	MY3	MY3N
Plug-in terminals	Standard models	4	Crossbar bifurcated	MY4Z-CBG	MY4ZN-CBG
PCB terminals	Standard models	2	Single	MY2-02	–
		3	Single	MY3-02	–
		4	Single	MY4-02	–
		4	Bifurcated	MY4Z-02	–
Case-surface mounting	Standard models	2	Single	MY2F	–
		3	Single	MY3F	–
		4	Single	MY4F	–
		4	Bifurcated	MY4ZF	–

Item		Rated current (mA)		Coil resistance (Ω)	Coil inductance (H)		Must operate voltage (V)	Must release voltage (V)	Maximum voltage (V)	Power consumption (VA, W)
Rated voltage (V)		50 Hz	60 Hz	Coil resistance (Ω)	Armature OFF	Armature ON	Must operate voltage (V)	Must release voltage (V)	Maximum voltage (V)	Power consumption (VA, W)
AC	12	106.5	91	46	0.17	0.33	80% max. 2 There is variation between products, but actual values are 80% maximum. To ensure operation, apply at least 80% of the rated value.	30% min. 2 There is variation between products, but actual values are 30% minimum for AC and 10% minimum for DC. To ensure release, use a value that is lower than the specified value.	110% of rated voltage	Approx. 0.9 to 1.3 (at 60 Hz)
	24	53.8	46	180	0.69	1.3
	100/110	11.7/12.9	10/11	3,750	14.54	24.6
	110/120	9.9/10.8	8.4/9.2	4,430	19.2	32.1
	200/220	6.2/6.8	5.3/5.8	12,950	54.75	94.07
	220/240	4.8/5.3	4.2/4.6	18,790	83.5	136.4
DC	12	75		160	0.73	1.37		10% min. 2 There is variation between products, but actual values are 30% minimum for AC and 10% minimum for DC. To ensure release, use a value that is lower than the specified value.		Approx. 0.9
	24	36.9		650	3.2	5.72
	48	18.5		2,600	10.6	21.0
	100/110	9.1/10		11,000	45.6	86.2

Note:

The rated current and coil resistance are measured at a coil temperature of 23°C with tolerances of +15%/–20% for AC rated current and ±15% for DC coil resistance.
The AC coil resistance and inductance values are reference values only (at 60 Hz).
Operating characteristics were measured at a coil temperature of 23°C.
The maximum voltage capacity was measured at an ambient temperature of 23°C.

Contact Ratings

Number of poles (contact configuration)	2-pole (DPDT)						3-pole (3PDT)
Contact structure	Single				Bifurcated		Single
Contact structure			With latching lever (S)		Bifurcated		Single
Load	Resistive load	Inductive load (cos φ= 0.4, L/R = 7 ms)	Resistive load	Inductive load (cos φ= 0.4, L/R = 7 ms)	Resistive load	Inductive load (cos φ= 0.4, L/R = 7 ms)	Resistive load	Inductive load (cos φ= 0.4, L/R = 7 ms)
Rated load	5 A at 220 VAC 5 A at 24 VDC	2 A at 220 VAC 2 A at 24 VDC	5 A at 250 VAC 5 A at 30 VDC	2 A at 250 VAC 2 A at 30 VDC	5 A at 220 VAC 5 A at 24 VDC	2 A at 220 VAC 2 A at 24 VDC	5 A at 220 VAC 5 A at 24 VDC	2 A at 220 VAC 2 A at 24 VDC
Rated carry current 2 If you use a Socket, do not exceed the rated carry current of the Socket.	5 A (10 A 2 Values shown in parentheses are for the MY⬜(S) model with latching lever. )				5 A		5 A
Maximum switching voltage	250 VAC, 125 VDC						250 VAC, 125 VDC
Maximum switching current	5 A		10 A		5 A		5 A
Maximum switching power	1,100 VA 120 W	440 VA 48 W	2,500 VA 300 W	500 VA 60 W	1,100 VA 120 W	440 VA 48 W	1,100 VA 120 W	440 VA 48 W
Contact material	Ag				Au plating + Ag		Ag

Number of poles (contact configuration)	4-pole (4PDT)
Contact structure	Single				Bifurcated				Crossbar bifurcated (CBG)
Contact structure			With latching lever (S)				With latching lever (S)		Crossbar bifurcated (CBG)
Load	Resistive load	Inductive load (cos φ= 0.4, L/R = 7 ms)	Resistive load	Inductive load (cos φ= 0.4, L/R = 7 ms)	Resistive load	Inductive load (cos φ= 0.4, L/R = 7 ms)	Resistive load	Inductive load (cos φ= 0.4, L/R = 7 ms)	Resistive load	Inductive load (cos φ= 0.4, L/R = 7 ms)
Rated load	3 A at 220 VAC 3 A at 24 VDC	0.8 A at 220 VAC 1.5 A at 24 VDC	3 A at 250 VAC 3 A at 30 VDC	0.8 A at 250 VAC 1.5 A at 30 VDC	3 A at 220 VAC 3 A at 24 VDC	0.8 A at 220 VAC 1.5 A at 24 VDC	3 A at 250 VAC 3 A at 30 VDC	0.8 A at 250 VAC 1.5 A at 30 VDC	1 A at 220 VAC 1 A at 24 VDC	0.3 A at 220 VAC 0.5 A at 24 VDC
Rated carry current 2 If you use a Socket, do not exceed the rated carry current of the Socket.	3 A (5 A 2 Values shown in parentheses are for the MY⬜(S) model with latching lever. )				3 A (5 A*2)				1 A
Maximum switching voltage	250 VAC, 125 VDC
Maximum switching current	3 A								1 A
Maximum switching power	660 VA 72 W	176 VA 36 W	1,250 VA 150 W	200 VA 45 W	660 VA 72 W	176 VA 36 W	1,250 VA 150 W	200 VA 45 W	220 VA 24 W	66 VA 12 W
Contact material	Au cladding + Ag alloy								Au cladding + AgPd

Characteristics

Number of poles (contact configuration)		2-pole (DPDT)		3-pole (3PDT)	4-pole (4PDT)
Contact structure		Single	Bifurcated	Single	Single	Bifurcated	Crossbar bifurcated (CBG)
Contact resistance 2 Models with latching lever are 100 mW maximum. 2 Measurement conditions: 1 A at 5 VDC using the voltage drop method.		50 mΩ max.					100 mΩ max.
Operate time 2 Measurement conditions: With rated operating power applied, not including contact bounce.		20 ms max.
Release time 2 Measurement conditions: With rated operating power applied, not including contact bounce.		20 ms max.
Maximum switching frequency	Mechanical	18,000 operations/h
Maximum switching frequency	Rated load	1,800 operations/h
Insulation resistance 2 Measurement conditions: For 500 VDC applied to the same location as for dielectric strength measurement.		100 MΩ min.
Dielectric strength	Between coil and contacts	2,000 VAC, 50/60 Hz for 1 min
	Between contacts of different polarity	2,000 VAC, 50/60 Hz for 1 min
	Between contacts of the same polarity	1,000 VAC at 50/60 Hz for 1 min					700 VAC at 50/60 Hz for 1 min
Vibration resistance	Destruction	10 to 55 to 10 Hz, 0.5-mm single amplitude (1.0-mm double amplitude)
Vibration resistance	Malfunction	10 to 55 to 10 Hz, 0.5-mm single amplitude (1.0-mm double amplitude)
Shock resistance	Destruction	1,000 m/s²
Shock resistance	Malfunction	200 m/s²
Endurance	Mechanical	AC: 50,000,000 operations min. DC: 100,000,000 operations min. (switching frequency: 18,000 operations/h)	AC: 50,000,000 operations min. DC: 50,000,000 operations min. (switching frequency: 18,000 operations/h)	AC: 50,000,000 operations min. DC: 100,000,000 operations min. (switching frequency: 18,000 operations/h)	AC: 50,000,000 operations min. DC: 100,000,000 operations min. (switching frequency: 18,000 operations/h)	AC: 20,000,000 operations min. DC: 20,000,000 operations min. (switching frequency: 18,000 operations/h)	AC: 50,000,000 operations min. DC: 50,000,000 operations min. (switching frequency: 18,000 operations/h)
Endurance	Electrical 2 Ambient temperature condition: 23°C	500,000 operations min. (rated load, switching frequency: 1,800 operations/h)	200,000 operations min. (rated load, switching frequency: 1,800 operations/h)	500,000 operations min. (rated load, switching frequency: 1,800 operations/h)	200,000 operations min. (rated load, switching frequency: 1,800 operations/h)	100,000 operations min. (rated load, switching frequency: 1,800 operations/h)	50,000 operations min. (rated load, switching frequency: 1,800 operations/h)
Failure rate P value (reference value) 2 This value was measured at a switching frequency of 120 operations per minute.		1 mA at 5 VDC	100 μA at 1 VDC	1 mA at 5 VDC	1 mA at 1 VDC	100 μA at 1 VDC	100 μA at 1 VDC
Weight		Approx. 35 g	Approx. 35 g	Approx. 35 g	Approx. 35 g	Approx. 35 g	Approx. 35 g

Note:

The data shown above are initial values.

Classification	Standard models					Models with built-in diode for coil surge absorption (-D)/ Models with built-in CR circuit for coil surge absorption (-CR)
Contacts	Single/bifurcated			Crossbar/bifurcated (CBG)		Single/bifurcated
Features	Without operation indicator	With operation indicator		Without operation indicator	With operation indicator	Without operation indicator	With operation indicator
Features	Without operation indicator		With latching lever	Without operation indicator	With operation indicator	Without operation indicator		With latching lever
Ambient operating temperature 2 With no icing or condensation.	−55 to 70°C	−55 to 60°C 2 This limitation is due to the diode junction temperature and elements used.	−55 to 70°C	−25 to 70°C	−25 to 60°C	−55 to 60°C 2 This limitation is due to the diode junction temperature and elements used.	−55 to 60°C 2 This limitation is due to the diode junction temperature and elements used.	−55 to 70°C
Ambient operating humidity	5% to 85%					5% to 85%

Miniature Power Latching Relays: MYK

Operating Coil Ratings (AC)

Rated voltage (V)		Set coil			Reset coil			Must operate voltage (V)	Must release voltage (V)	Maximum voltage (V)	Power consumption (VA, W)
		Rated current (mA)		Coil resistance (Ω)	Rated current (mA)		Coil resistance (Ω)				Set coil	Reset coil
		50 Hz	60 Hz	Coil resistance (Ω)	50 Hz	60 Hz	Coil resistance (Ω)				Set coil	Reset coil
AC	12	57	56	72	39	38.2	130	80% max. 2 There is variation between products, but actual values are 80% maximum.	80% max.	110% max. of rated voltage	Approx. 0.6 to 0.9 (at 60 Hz)	Approx. 0.2 to 0.5 (at 60 Hz)
	24	27.4	26.4	320	18.6	18.1	550
	100	7.1	6.9	5,400	3.5	3.4	3,000
DC	12	110		110	50		235				Approx. 1.3	Approx. 0.6
	24	52		470	25		940
	48	27		1,800	16		3,000

Note:

The rated current for AC is the value measured with a DC ammeter in half-wave rectification.
The rated current and coil resistance are measured at a coil temperature of 23°C with tolerances of +15%/–20% for AC rated current and ±15% for DC coil resistance.
The AC coil resistance is a reference value only.
Operating characteristics were measured at a coil temperature of 23°C.
The maximum voltage capacity was measured at an ambient temperature of 23°C.
There is variation between products, but actual values are 80% maximum.

Contact Ratings

Number of poles (contact configuration)	2-pole (DPDT)
Contact structure	Single
Load	Resistive load	Inductive load (cos φ = 0.4, L/R = 7 ms)
Rated load	3 A at 220 VAC 3 A at 24 VDC	0.8 A at 220 VAC 1.5 A at 24 VDC
Rated carry current	3 A
Maximum switching voltage	250 VAC, 125 VDC
Maximum switching current	3 A
Maximum switching power	660 VA 72 W	176 VA 36 W
Contact material	Au plating + Ag

Characteristics

Contact resistance 2 Measurement conditions: 1 A at 5 VDC using the voltage drop method.		50 mΩ max.
Set	Operate time 2 Measurement conditions: With rated operating power applied, not including contact bounce.	AC: 30 ms max., DC: 15 ms max.
Set	Minimum pulse width	AC: 60 ms, DC: 30 ms
Reset	Release time 2 Measurement conditions: With rated operating power applied, not including contact bounce.	AC: 30 ms max., DC: 15 ms max.
Reset	Minimum pulse width	AC: 60 ms, DC: 30 ms
Maximum switching frequency	Mechanical	18,000 operations/h
Maximum switching frequency	Rated load	1,800 operations/h
Insulation resistance 2 Measurement conditions: For 500 VDC applied to the same location as for dielectric strength measurement.		100 MΩ min.
Dielectric strength	Between coil and contacts Between contacts of different polarity	1,500 VAC at 50/60 Hz for 1 min
	Between contacts of the same polarity	1,000 VAC at 50/60 Hz for 1 min
	Between set/reset coils	1,000 VAC at 50/60 Hz for 1 min
Vibration resistance	Destruction	10 to 55 to 10 Hz, 0.5-mm single amplitude (1.0-mm double amplitude)
Vibration resistance	Malfunction	10 to 55 to 10 Hz, 0.5-mm single amplitude (1.0-mm double amplitude)
Shock resistance	Destruction	1,000 m/s²
Shock resistance	Malfunction	200 m/s²
Endurance	Mechanical	100,000,000 operations min. (switching frequency: 18,000 operations/h)
Endurance	Electrical 2 Ambient temperature condition: 23°C	200,000 operations min. (at rated load, switching frequency: 1,800 operations/h)
Failure rate P value (reference value) 2 This value was measured at a switching frequency of 120 operations per minute.		1 mA at 1 VDC
Ambient operating temperature 2 With no icing or condensation.		−55 to 60°C
Ambient operating humidity		5% to 85%
Weight		Approx. 30 g

Note:

The data shown above are initial values.

Miniature Power Sealed Relays: MYQ/MYH

Operating Coil Ratings (AC)

Rated voltage (V)		Rated current (mA)		Coil resistance (Ω)	Coil inductance (H)		Must operate voltage (V) 2 There is variation between products, but actual values are 80% maximum. To ensure operation, apply at least 80% of the rated value.	Must release voltage (V) 2 There is variation between products, but actual values are 30% minimum for AC and 10% minimum for DC. To ensure release, use a value that is lower than the specified value.	Maximum voltage (V)	Power consumption (VA, W)
Rated voltage (V)		50 Hz	60 Hz	Coil resistance (Ω)	Armature OFF	Armature ON			Maximum voltage (V)	Power consumption (VA, W)
AC	24	53.8	46	180	0.69	1.3	80% max.	30% min.	110% max. of rated voltage	Approx. 0.9 to 1.3 (at 60 Hz)
	100/110	11.7/12.9	10/11	3,750	14.54	24.6
	110/120	9.9/10.8	8.4/9.2	4,430	19.2	32.1
	200/220	6.2/6.8	5.3/5.8	12,950	54.75	91.07
	220/240	4.8/5.3	4.2/4.6	18,790	83.5	136.4
DC	12	75		165	0.734	1.37		10% min.		Approx. 0.9
	24	36.9		650	3.2	5.72
	48	18.5		2,600	10.6	21.0
	100/110	9.1/10		11,000	45.6	86.0

Note:

The rated current and coil resistance are measured at a coil temperature of 23°C with tolerances of +15%/–20% for AC rated current and ±15% for DC coil resistance.
The AC coil resistance and coil inductance values are for reference only.
Operating characteristics were measured at a coil temperature of 23°C.
The maximum voltage capacity was measured at an ambient temperature of 23°C.

Contact Ratings

Model	Plastic Sealed Relays: MYQ		Hermetically Sealed Relays: MYH
Number of poles (contact configuration)	4-pole (4PDT)		4-pole (4PDT)
Contact structure	Single/bifurcated		Single		Bifurcated
Load	Resistive load	Inductive load (cos φ= 0.4, L/R = 7 ms)	Resistive load	Inductive load (cos φ= 0.4, L/R = 7 ms)	Resistive load	Inductive load (cos φ= 0.4, L/R = 7 ms)
Rated load	1 A at 220 VAC 1 A at 24 VDC	0.5 A at 220 VAC 0.5 A at 24 VDC	3 A at 110 VAC 3 A at 24 VDC	0.8 A at 110 VAC 1.5 A at 24 VDC	3 A at 110 VAC 3 A at 24 VDC	0.8 A at 110 VAC 1.5 A at 24 VDC
Rated carry current	1 A		3 A
Maximum switching voltage	250 VAC 125 VDC		125 VAC 125 VDC
Maximum switching current	1 A		3 A
Maximum switching power	220 VA 24 W	110 VA 12 W	330 VA 72 W	88 VA 36 W	330 VA 72 W	88 VA 36 W
Contact material	Au plating + Ag		Au plating + Ag

Characteristics

Model			MYQ	MYH
Contact resistance 2 Measurement conditions: 1 A at 5 VDC using the voltage drop method.			50 mΩ max.
Operate time 2 Measurement conditions: With rated operating power applied, not including contact bounce. Ambient temperature condition: 23°C			20 ms max.
Release time 2 Measurement conditions: With rated operating power applied, not including contact bounce. Ambient temperature condition: 23°C			20 ms max.
Maximum switching frequency	Mechanical		18,000 operations/h
Maximum switching frequency	Rated load		1,800 operations/h
Insulation resistance 2 Measurement conditions: For 500 VDC applied to the same location as for dielectric strength measurement.			100 MΩ min.
Dielectric strength	Between coil and contacts		1,500 VAC at 50/60 Hz for 1 min	1,000 VAC at 50/60 Hz for 1 min
	Between contacts of different polarity		1,500 VAC at 50/60 Hz for 1 min	1,000 VAC at 50/60 Hz for 1 min
	Between contacts of the same polarity		1,000 VAC at 50/60 Hz for 1 min	700 VAC at 50/60 Hz for 1 min
Vibration resistance	Destruction		10 to 55 to 10 Hz, 0.5-mm single amplitude (1.0-mm double amplitude)
Vibration resistance	Malfunction		10 to 55 to 10 Hz, 0.5-mm single amplitude (1.0-mm double amplitude)
Shock resistance	Destruction		1,000 m/s²
Shock resistance	Malfunction		200 m/s²
Endurance	Mechanical	Single contacts	AC: 50,000,000 operations min., DC: 100,000,000 operations min.	50,000,000 operations min.
	Mechanical	Bifurcated contacts	5,000,000 operations min., DC: 5,000,000 operations min. (switching frequency: 18,000 operations/h)	5,000,000 operations min. (switching frequency: 18,000 operations/h)
	Electrical 2 Ambient temperature condition: 23°C	Single contacts	200,000 operations min.	100,000 operations min.
	Electrical 2 Ambient temperature condition: 23°C	Bifurcated contacts	100,000 operations min. (at rated load, switching frequency: 1,800 operations/h)	50,000 operations min. (at rated load, switching frequency: 1,800 operations/h)
Failure rate P Level (reference value) 2 This value was measured at a switching frequency of 120 operations per minute.		Single contacts	1 mA at 1 VDC	100 μA at 1 VDC
		Bifurcated contacts	100 μA at 1 VDC	100 μA at 100 mVDC
Ambient operating temperature 2 With no icing or condensation.			−55 to 60°C	−25 to 60°C
Ambient operating humidity			5% to 85%
Weight			Approx. 35 g	Approx. 50 g

Note:

The data shown above are initial values.

Miniature Power Relays: MY-GS

Operating Coil Ratings

Rated voltage (V)		Rated current (mA)		Coil resistance (Ω)	Coil inductance (H)		Must operate voltage (V) 2 There is variation between products, but actual values are 80% max. The Relay will operate if 80% or higher of the rated voltage is applied. However, to achieve the specified characteristics, apply the rated voltage to the coil.	Must release voltage (V) 2 There is variation between products, but actual values are 30% minimum for AC and 10% minimum for DC. To ensure release, use a value that is lower than the specified value.	Maximum voltage (V)	Power consumption (VA, W)
Rated voltage (V)		50 Hz	60 Hz	Coil resistance (Ω)	Armature OFF	Armature ON			Maximum voltage (V)	Power consumption (VA, W)
AC	12	106.5	91	46	0.17	0.33	80% max.	30% min.	110%	Approx. 0.9 to 1.3 (at 60 Hz)
	24	53.8	46	180	0.69	1.3
	48	25.7	21.1	788	3.22	5.66
	100/110	11.7/12.9	10.0/11.0	3,750	14.54	24.6
	110/120	9.9/10.8	8.4/9.2	4,430	19.2	32.1
	200/220	6.2/6.8	5.3/5.8	12,950	54.75	94.07
	220/240	5.2/6.2	4.3/5.0	15,920	83.5	136.4
DC	6	146 (151)		41.0 (39.8)	0.17	0.33		10% min.		Approx. 0.9
	12	72.7 (75)		165 (160)	0.73	1.37
	24	36.3 (37.7)		662 (636)	3.2	5.72
	48	17.6 (18.8)		2,725 (2,560)	10.6	21.0
	100/110	8.7 (9.0)/9.6 (9.9)		11,440 (11,100)	45.6	86.2
	220	3.6		60,394	362.3	452.9				Approx. 0.8

Note:

The rated current and coil resistance are measured at a coil temperature of 23°C with tolerances of +15%/–20% for the AC rated current and +15% for the DC coil resistance.
The AC coil resistance and inductance values are reference values only (at 60 Hz).
Operating characteristics were measured at a coil temperature of 23°C.
The values in parentheses for the rated currents and coil voltages of DC coils are for models with LED operation indicators.
The maximum voltage capacity was measured at an ambient temperature of 23°C.

Contact Ratings

Number of poles	2 poles		4 poles
Load	Resistive load	Inductive load (cos φ= 0.4, L/R = 7 ms)	Resistive load	Inductive load (cos φ= 0.4, L/R = 7 ms)
Contact configuration	DPDT		4PDT
Contact structure	Single
Contact material	Ag
Rated load	5 A at 220 VAC 5 A at 24 VDC	2 A at 220 VAC 2 A at 24 VDC	3 A at 220 VAC 3 A at 24 VDC	0.8 A at 220 VAC 1.5 A at 24 VDC
Rated carry current	5 A		3 A
Maximum contact voltage	250 VAC, 220 VDC		250 VAC, 220 VDC
Maximum contact current	5 A		3 A
Maximum switching capacity	1,100 VA 120 W	440 VA 48 W	660 VA 72 W	176 VA 36 W
Minimum load (reference values) 2 These values are guides for the switchable limits for minute load levels, such as in electronic circuits. Actual characteristics may be different. These values will depend on the switching frequency, atmosphere, and expected reliability level. Confirm applicability in the actual system under actual application conditions.	1 mA at 5 VDC

Characteristics

		2 poles	4 poles
Contact resistance 2 Measurement conditions: 1 A at 5 VDC using the voltage drop method.		100 mΩ max.
Operation time 2 Measurement conditions: With rated operating power applied, not including contact bounce time.		20 ms max.
Release time 2 Measurement conditions: With rated operating power applied, not including contact bounce time.		20 ms max.
Maximum operating frequency	Mechanical	18, 000 operations/h
Maximum operating frequency	Rated load	2,400 operations/h
Insulation resistance 2 Measurement conditions: For 500 VDC applied to the same location as for dielectric strength measurement.		1,000 MΩ min.
Dielectric strength	Between coil and contacts	2,000 VAC at 50/60 Hz for 1 min.
	Between contacts of different polarity	2,000 VAC at 50/60 Hz for 1 min.
	Between contacts of the same polarity	1,000 VAC at 50/60 Hz for 1 min.
Vibration resistance	Destruction	10 to 55 to 10 Hz, Double amplitude: 1.0 mm
Vibration resistance	Malfunction	10 to 55 to 10 Hz, Double amplitude: 1.0 mm
Shock resistance	Destruction	1,000 m/s² (approx. 100 G)
Shock resistance	Malfunction	200 m/s² (Approx. 20 G)
Endurance	Mechanical	50,000,000 operations (switching frequency: 18,000 operations/h)
Endurance	Electrical 2 Ambient temperature condition: 23°C Duty ratio: 33%	500,000 operations (switching frequency: 2,400 operations/h)	200,000 operations (switching frequency: 2,400 operations/h)
Ambient operating temperature		Standard models: –55 to 70°C (with no icing or condensation) Models with LED operation indicators: –40 to 70°C (with no icing or condensation)
Ambient humidity		5% to 85%
Weight		Approx. 35 g

Note:

The above values are initial values.

Модели

MY(S) - Miniature Power Relays

Универсальное штепсельное реле, задающее новый стандарт качества

Более 1 миллиарда этих миниатюрных реле питания было произведено с момента их появления. Они успешно используются во многих областях применения. Для обеспечения надежности переключения слабых токов на протяжении всего срока службы электрических компонентов доступна опция раздвоенных контактов. Полный ассортимент гнезд с разным типом монтажа: винтовым, зажимным или безвинтовым.
Благодаря хорошей видимости светодиодных индикаторов и простым в использовании функциям кнопки проверки модели MY-S пользуются наибольшим спросом
Семейство MY-S включает модели MY4Z с раздвоенными контактами для малых нагрузок
Модели MY-S широко используются в области автоматизации зданий и часто выбираются клиентами для систем климат-контроля, систем отопления, вентиляции и кондиционирования воздуха (ОВКВ), а также подъемных систем

MYK - Miniature Power Latching Relays

Реле с магнитной фиксацией идеально подходит для цепей памяти и передачи данных

Реле с магнитной фиксацией MYK, сохраняющие рабочее состояние контактов и при низком энергопотреблении
Система двухэлементной фиксации удерживает остаточную индукцию. Специальные материалы, обладающие магнитными свойствами, сводят к минимуму последствия старения и износа, обеспечивая таким образом продолжительное время удержания. На протяжении всего срока службы такие характеристики, как ход контакта, давление в контактах и т. д., изменяются незначительно.
Превосходная устойчивость к вибрации/ударам
Встроенный индикатор работы с функциями ВКЛ/ВЫКЛ обеспечивает простой контроль работы
MY2K также используется в панелях управления ветроэлектростанций

MYQ/MYH - Miniature Power Sealed Relays

Герметичные реле устойчивы к негативному воздействию пыли, агрессивных газов и т. д.

В запыленной среде, например в условиях работы формовочных и шлифовальных машин, а также в условиях, где обитают мелкие насекомые (мошкара или комары), эти чужеродные элементы могут проникнуть в реле через вентиляционные отверстия или отверстия между компонентами реле. Попав внутрь реле, пыль и насекомые зачастую остаются там. Если они попадают на контакты, это может привести к неисправности и нестабильности контактов. Пластиковые защищенные реле (MYQ) и герметичные реле (MYH) устойчивы к воздействию окружающей среды
Их использование также рекомендуется для среды, в которой образуются агрессивные газы, например хлорный, серный или кремнийсодержащий газ.
Они также устойчивы к солевым повреждениям и негативному воздействию пыли.
Высокогерметичная конструкция предотвращает неисправности контактов реле

MY-GS - Miniature Power Relays Mechanical indicators added as a standard feature to our best-selling MY General-purpose relays

MY-GS – последняя модель в семействе MY: эти реле производятся на полностью автоматизированном предприятии
В сочетании с гнездами PYF-PU Push-In Plus можно добиться сокращения объема работ по коммутации на 60% (согласно фактическим измерениям, проведенным компанией OMRON).
На обмотке рабочей катушки указаны ее характеристики
Механические индикаторы работы являются стандартной функцией для всех моделей
Соответствует требованиям стандартов RoHS, UL, CSA и IEC (сертификация VDE).
Механические индикаторы являются стандартной функцией для всех моделей и позволяют легко проверять состояние контактов.
Модель MY-GS подходит для применения в областях, где требуется прочное и надежное реле, и часто используется в работе упаковочного оборудования в пищевой промышленности

Гнездо

Загрузка

Брошюры

MY Miniature Power Relays Брошюра

enPDF 1,4 МБ

Sockets for MY Miniature Power Relays Брошюра

enPDF 4,9 МБ

Показать все брошюры

Спецификации

MY Miniature Power Relays - MY/MYK/MYQ·MYH Спецификация

enPDF 19,2 МБ

MY(S) Miniature Power Relays Спецификация

enPDF 9,9 МБ

PYF__S Screwless Clamp Terminal Socket Спецификация

enPDF 779,0 КБ

На других языках

Показать все спецификации

Подписаться на новости и обновления о продуктах

Подпишитесь на новостную рассылку и получайте новости о разработках продукции, решениях и услугах прямо на свой почтовый ящик.

Благодарим Вас за подписку на Omron eNews. В ближайшее время на электронный адрес, который Вы указали при регистрации, будет выслано уведомление о подтверждении подписки. Чтобы подтвердить подписку, проследуйте указанной в письме ссылке. Данная процедура необходима для соблюдения существующих правовых норм и в целях предотвращения возможного злоупотребления Вашим электронным адресом третьими лицами.

Возникли технические проблемы. Ваша форма не была отправлена. Примите наши извинения и повторите попытку позже. Детали: [details]

Download

Техническая документация

Загрузить даташиты, руководства и брошюры.

Перейти на страницу загрузки

Обучающие курсы

Пройти обучающие курсы от наших лучших специалистов. От начального до продвинутого уровня.

Просмотреть обучающие курсы

Мы используем файлы cookie для обеспечения наиболее удобной работы с сайтом.

Настройки файлов cookie

Войти в систему

Зарегистрируйтесь

Спасибо за регистрацию на сайте компании Omron

получите прямой доступ

Благодарим вас за проявленный интерес

Did you know that 4 out of 5 distributors buy this product in a bundle?

Самые популярные реле общего назначения для любых условий эксплуатации и любой области применения

Ordering information

Miniature Power Relays: MY(S)

Miniature Power Latching Relays: MYK

Miniature Power Sealed Relays: MYQ/MYH

Plastic Sealed Relays: MYQ

Hermetically Sealed Relays: MYH

Miniature Power Relays: MY-GS

Specifications

Miniature Power Relays: MY(S)

Operating Coils Ratings

Contact Ratings

Characteristics

Miniature Power Latching Relays: MYK

Operating Coil Ratings (AC)

Contact Ratings

Characteristics

Miniature Power Sealed Relays: MYQ/MYH

Operating Coil Ratings (AC)

Contact Ratings

Characteristics

Miniature Power Relays: MY-GS

Operating Coil Ratings

Contact Ratings

Characteristics

MY(S) - Miniature Power Relays

Универсальное штепсельное реле, задающее новый стандарт качества

MYK - Miniature Power Latching Relays

Реле с магнитной фиксацией идеально подходит для цепей памяти и передачи данных

MYQ/MYH - Miniature Power Sealed Relays

Герметичные реле устойчивы к негативному воздействию пыли, агрессивных газов и т. д.

MY-GS - Miniature Power Relays Mechanical indicators added as a standard feature to our best-selling MY General-purpose relays

Брошюры

Спецификации