SX Series

Гармония мощности и универсальности

Инвертор SX предназначен для работы в системах, требующих высокого уровня мощности, от насосов, вентиляторов, компрессоров или воздуходувок до управления вектором в замкнутом контуре, требуемого в кранах, дробилках, прессах или мешалках. Стандартный инвертор имеет встроенное программное обеспечение для конкретных задач, а конструкция его аппаратного оборудования обеспечивает универсальность для пользователя.

Подача питания 400 В с мощностью от 0,75 до 1400 кВт
Новое управляющее устройство с часами реального времени
Дополнительная панель управления с Bluetooth
Управление двигателями с постоянными магнитами
Компактная конструкция IP20 и IP54 для всего модельного ряда
Встроенный фильтр, соответствующий классу C3, и предохранители номиналом от 220 кВт
Стандарты безопасности EN62061, безопасное снятие момента (STO), уровень SIL2
Управление кривой нагрузки
Возможность программирования логики
Встроенная настройка под отдельные приложения, такие как управление несколькими насосами или использование в кранах
Возможность индивидуальной настройки аппаратного оборудования (главный выключатель, жидкостное охлаждение, 12-импульсный выпрямитель и т. д.)
Обмен данными через промышленные сети: EtherCAT, PROFINET, Modbus, DeviceNet, PROFIBUS, Modbus TCP

Сравнить все модели

Характеристики и информация для заказа

Ordering information

SX

Specifications					Order code
Voltage	Heavy duty		Normal duty		IP54 model		IP20 model
Voltage	Heavy duty		Normal duty		Direct torque control	V/F	Direct torque control	V/F
400 V	0.55 kW	2.0 A	0.75 kW	2.5 A	SX-D40P7-EF	SX-D40P7-EV	-	-
	1.1 kW	3.2 A	1.5 kW	4.0 A	SX-D41P5-EF	SX-D41P5-EV
	1.5 kW	4.8 A	2.2 kW	6.0 A	SX-D42P2-EF	SX-D42P2-EV
	2.2 kW	6.0 A	3 kW	7.5 A	SX-D43P0-EF	SX-D43P0-EV
	3 kW	7.6 A	4 kW	9.5 A	SX-D44P0-EF	SX-D44P0-EV
	4 kW	10.4 A	5.5 kW	13 A	SX-D45P5-EF	SX-D45P5-EV
	5.5 kW	14.4 A	7.5 kW	18 A	SX-D47P5-EF	SX-D47P5-EV
	7.5 kW	21 A	11 kW	26 A	SX-D4011-EF	SX-D4011-EV
	11 kW	25 A	15 kW	31 A	SX-D4015-EF	SX-D4015-EV
	15 kW	29.6 A	18.5 kW	37 A	SX-D4018-EF	SX-D4018-EV
	18.5 kW	37 A	22 kW	46 A	SX-D4022-EF	SX-D4022-EV
	22 kW	49 A	30 kW	61 A	SX-D4030-EF	SX-D4030-EV
	30 kW	59 A	37 kW	74 A	SX-D4037-EF	SX-D4037-EV
	37 kW	72 A	45 kW	90 A	SX-D4045-EF	SX-D4045-EV
	45 kW	87 A	55 kW	109 A	SX-D4055-EF	SX-D4055-EV
	55 kW	117 A	75 kW	146 A	SX-D4075-EF	SX-D4075-EV
	75 kW	140 A	90 kW	175 A	SX-D4090-EF	SX-D4090-EV
	90 kW	168 A	110 kW	210 A	SX-D4110-EF	SX-D4110-EV
	110 kW	200 A	132 kW	250 A	SX-D4132-EF	SX-D4132-EV
	132 kW	240 A	160 kW	300 A	SX-D4160-E1F	SX-D4160-E1V	SX-A4160-EF	SX-A4160-EV
	160 kW	300 A	200 kW	375 A	SX-D4200-E1F	SX-D4200-E1V	SX-A4200-EF	SX-A4200-EV
	200 kW	344 A	220 kW	430 A	SX-D4220-E1F	SX-D4220-E1V	SX-A4220-EF	SX-A4220-EV
	220 kW	400 A	250 kW	500 A	SX-D4250-E1F	SX-D4250-E1V	SX-A4250-EF	SX-A4250-EV
	250 kW	480 A	315 kW	600 A	SX-D4315-E1F	SX-D4315-E1V	SX-A4315-EF	SX-A4315-EV
	315 kW	520 A	355 kW	650 A	SX-D4355-E1F	SX-D4355-E1V	SX-A4355-EF	SX-A4355-EV
	355 kW	600 A	400 kW	750 A	SX-D4400-E1F	SX-D4400-E1V	SX-A4400-EF	SX-A4400-EV
	400 kW	688 A	450 kW	860 A	SX-D4450-E1F	SX-D4450-E1V	SX-A4450-EF	SX-A4450-EV
	450 kW	800 A	500 kW	1,000 A	SX-D4500-E1F	SX-D4500-E1V	SX-A4500-EF	SX-A4500-EV
	500 kW	960 A	630 kW	1,200 A	SX-D4630-E1F	SX-D4630-E1V	SX-A4630-EF	SX-A4630-EV
	630 kW	1,200 A	800 kW	1,500 A	SX-D4800-E1F	SX-D4800-E1V	SX-A4800-EF	SX-A4800-EV

① Panel kit

Type	Description	Function	Order code
Panel kit	Panel kit	Complete panel kit including operator	SX-OP02-00-E
Panel kit	Blank panel kit	Complete panel kit including a blank operator	SX-OP02-01-E
Operator	External control panel	External control panel (SX-D40P7 to SX-D47P5)	SX-OP02-71-E
	External blank panel	External blank panel (SX-D4011 to SX-D4022)	SX-OP02-81-E
	Handheld control panel	Complete handheld control panel	SX-OPHH-00-E
	Digital operator	Inverter digital operator	SX-OP01-00-E
	Blank operator	Blank operator	SX-OP01-11-E

② I/O option board

Description	Function	Order code
Additional I/O option	Provides 3 extra relay outputs and 3 additional digital inputs	01-3876-01
Crane option	Dedicated option board for crane application, including additional I/O and functions	01-3876-07

③ Communication option board

Description	Function	Order code
RS232/485	MODBUS RTU serial communication by RS232 or RS485 interface with galvanic isolation	01-3876-04
PROFIBUS-DP	Used for operating the inverter through PROFIBUS-DP communication with the host controller	01-3876-05
DeviceNet	Used for operating the inverter through DeviceNet communication with the host controller	01-3876-06
Modbus/TCP, Ethernet	Used for operating the inverter through Modbus/TCP communication with the host controller	01-3876-09
EtherCAT	Used for operating the inverter through EtherCAT communication with the host controller	01-3876-10
PROFINET (1-port)	Used for operating the inverter through PROFINET communication with the host controller	01-3876-11
PROFINET (2-ports)		01-3876-12

④ Encoder feedback option card

Description	Function	Order code
Encoder option	Used for connection of the actual motor speed via encoder. Up to 100 kHz with TTL and HTL incremental encoders with 5/24 V power supply	01-3876-03

Description

Function

Order code

Encoder option

Used for connection of the actual motor speed via encoder.

Up to 100 kHz with TTL and HTL incremental encoders with 5/24 V power supply

01-3876-03

⑤ PTC/PT100 option card

Description	Function	Order code
Thermal protection	Allows to connect a motor thermistor to the inverter	01-3876-08

⑥ Braking chopper and braking resistor

All inverter sizes could be fitted with an optional built-in brake chopper from factory but is not possible to install it later. The choice of the resistor depends on the application switch-on duration and duty-cycle. Following tables describes the activation level of the built-in braking chopper and the minimum resistor that could be used depending on the input voltage.

R for different input voltage ( Ω)			Order code	R for different input votlage ( Ω)			Order code
220-240 VAC	380-415 VAC	440-480 VAC	Order code	220-240 VAC	380-415 VAC	440-480 VAC	Order code
43	43	50	SX-40P7	3.8	3.8	4.4	SX-4075
43	43	50	SX-41P5	3.8	3.8	4.4	SX-4090
43	43	50	SX-42P2	2.7	2.7	3.1	SX-4110
43	43	50	SX-43P0	2.7	2.7	3.1	SX-4132
43	43	50	SX-44P0	2 × 3.8	2 × 3.8	2 × 4.4	SX-4160
43	43	50	SX-45P5	2 × 3.8	2 × 3.8	2 × 4.4	SX-4200
43	43	50	SX-47P5	2 × 2.7	2 × 2.7	2 × 3.1	SX-4220
26	26	30	SX-4011	2 × 2.7	2 × 2.7	2 × 3.1	SX-4250
26	26	30	SX-4015	3 × 2.7	3 × 2.7	3 × 3.1	SX-4315
17	17	20	SX-4018	3 × 2.7	3 × 2.7	3 × 3.1	SX-4355
17	17	20	SX-4022	3 × 2.7	3 × 2.7	3 × 3.1	SX-4400
9.7	9.7	N/A	SX-4030	4 × 2.7	4 × 2.7	4 × 3.1	SX-4450
9.7	9.7	N/A	SX-4037	4 × 2.7	4 × 2.7	4 × 3.1	SX-4500
3.8	3.8	4.4	SX-4045	6 × 2.7	6 × 2.7	6 × 3.1	SX-4630
3.8	3.8	4.4	SX-4055	-

Supply voltage (VAC)	Built-in brake chopper trigger level (VDC)
220-240	380
380-415	660
440-480	780

⑦ Output coils

Output coils above SX-D4132-E should be order from factory as they should be installed inside of the cabinet

Voltage	Inverter model	Rated current	Inductance	Rated voltage	Max. carrier	Max. output frequency	Max. temp	Order code
400 V	SX-40P7-E	2.8 A	1.5 mH	800 V	10 KHz	200 Hz	40ºC	473160 00
	SX-41P5-E	4.4 A	1.0 mH					473161 00
	SX-42P2-E	6.6 A	0.65 mH					473162 00
	SX-43P0-E	11.0 A	0.4 mH					473163 00
	SX-44P0-E	11.0 A	0.4 mH					473163 00
	SX-45P5-E	14.3 A	0.3 mH					473164 00
	SX-47P5-E	18.2 A	0.25 mH					473165 00
	SX-4011-E	26.4 A	0.175 mH		6 KHz			473166 00
	SX-4015-E	32 A	0.15 mH					473167 00
	SX-4018-E	65 A	0.1 mH					473168 00
	SX-4022-E
	SX-4030-E
	SX-4037-E	90 A	0.1 mH					473169 00
	SX-4045-E	90 A	0.1 mH					473169 00
	SX-4055-E	146 A	0.05 mH					473170 00
	SX-4075-E	146 A	0.05 mH					473170 00
	SX-4090-E	175 A	0.05 mH					473171 00
	SX-4110-E	275 A	0.032 mH		1.5 KHz	100 Hz		473172 00
	SX-4132-E	275 A	0.032 mH		1.5 KHz	100 Hz		473172 00

⑧ Overshoot clamp

Note: Only two types of overshoot clamps could be order for after mounting

Inverter	Function	Order code
SX-40P7 to SX-4132	Together with the output coils, the overshoot clamp restricts the voltage and the dV/dt on the motor winding. Inverters must be ordered including the option DC+/DC- connectors.	52163
SX-4160 to SX-4800	Together with the output coils, the overshoot clamp restricts the voltage and the dV/dt on the motor winding. Doesn´t require the “DC+/DC-” option.	52220

Computer software

Installation	Order code
Configuration and monitoring software tool	CX-Drive
Configuration and monitoring software tool	CX-One
Software tool for energy saving calculation	€Saver

Specifications

Three-phase: SX- _ 4 ___ -E _		0P7	1P5	2P2	3P0	4P0	5P5	7P5	011	015	018	022	030	037	045	055
Motor kW1	For HD setting	0.55	1.1	1.5	2.2	3	4	5.5	7.5	11	15	18.5	22	30	37	45
Motor kW1	For ND setting	0.75	1.5	2.2	3	4	5.5	7.5	11	15	18.5	22	30	37	45	55
Output characteristics	Max output current (A) _ -EF	3.8	6.0	9.0	11.3	14.3	19.5	27.0	39.0	46.0	55.0	69.0	92.0	111	108	131
	Max output current (A) _ -EV	3.0	4.8	7.2	9.0	11.4	15.6	21.6	31.0	37.0	44.0	55.0	73.0	89.0	108	131
	Rated output current (A) at HD	2.0	3.2	4.8	6.0	7.6	10.4	14.4	21.0	25.0	29.6	37.0	49.0	59.0	72.0	87.0
	Rated output current (A) at ND	2.5	4.0	6.0	7.5	9.5	13.0	18.0	26.0	31.0	37.0	46.0	61.0	74.0	90.0	109
	Output voltage	0 to Mains supply voltage
	Max. output frequency	400 Hz
Power supply	Rated input voltage and frequency	3-phase 230 to 480 V 50/60 Hz
	Allowable voltage fluctuation	10% to -15% (-10% at 230V)
	Allowable frequency fluctuation	45 to 65 Hz

Three-phase: SX- _ 4 ___ -E _		075	090	110	132	160	200	220	250	315	355	400	450	500	630	800
Motor kW2	For HD setting	55	75	90	110	132	160	200	220	250	315	355	400	450	500	630
Motor kW2	For ND setting	75	90	110	132	160	200	220	250	315	355	400	450	500	630	800
Output characteristics	Max output current (A) _ -EF	175	210	252	300	360	450	516	600	720	780	900	1,032	1,200	1,440	1,800
	Max output current (A) _ -EV	175	210	252	300	360	450	516	600	720	780	900	1,032	1,200	1,440	1,800
	Rated output current (A) at HD	117	140	168	200	240	300	344	400	480	520	600	688	800	960	1,200
	Rated output current (A) at ND	146	175	210	250	300	375	430	500	600	650	750	860	1,000	1,200	1,500
	Output voltage	0 to Mains supply voltage
	Max. output frequency	400 Hz
Power supply	Rated input voltage and frequency	3-phase 230 to 480 V 50/60 Hz
	Allowable voltage fluctuation	10% to -15% (-10% at 230V)
	Allowable frequency fluctuation	45 to 65 Hz

Dimensions

Degree of protection	Drive model	H	W	D
IP20	SX-A4160 to SX-A4200	1,036	500	390
	SX-A4220 to SX-A4250	1,036	500	450
	SX-A4315 to SX-A4400	1,036	730	450
	SX-A4450 to SX-A4500	1,036	1,100	450
	SX-A4630 to SX-A4800	1,036	1,560	450
IP54	SX-D40P7 to SX-D47P5	416	202.6	200
	SX-D4011 to SX-D4022	512	178	292.1
	SX-D4030 to SX-D4037	590	220	295
	SX-D4045 to SX-D4090	950	284.5	314
	SX-D4110 to SX-D4132	950	344.5	314
	SX-D4160 to SX-D4250	2,250	600	600
	SX-D4315 to SX-D4400	2,250	900	600
	SX-D4450 to SX-D4500	2,250	1,200	600
	SX-D4630 to SX-D4800	2,250	1,800	600

1. Based on a standard 4-pole motor for maximum applicable motor output

2. Based on a standard 4-pole motor for maximum applicable motor output

1. Based on a standard 4-pole motor for maximum applicable motor output

2. Based on a standard 4-pole motor for maximum applicable motor output

Как мы можем помочь вам?

Если вы хотите задать вопрос или узнать информацию о ценах, свяжитесь с нами или отправьте запрос.

Выслать предложение

Связаться со мной

Дополнительно

CX-Drive

Единый программный инструмент для настройки и обслуживания преобразователей частоты (инверторов) и сервоприводов
CX-One

Единый программный комплект для вашей системы автоматизации
Применение кранов

Реализация крановых функций