XW5_-P

Блоки клемм Push-in для монтажа на DIN-рейку

Блоки безвинтовых клемм типа «Push-In Plus» для уменьшения размеров шкафов управления и упрощения монтажа

Усилие вставки всего 8 Н сокращает время и трудоемкость подключения проводов
Клеммные блоки Push-in Plus более компактны по сравнению с обычными винтовыми клеммными блоками
Уменьшение размеров шкафов управления благодаря наличию моделей толщиной до 3,5 мм
Низкое усилие вставки и высокая сила удержания — простое подключение проводов и высокая надежность контакта
Отсутствует проблема ослабления затяжки винтов — нет необходимости в обслуживании

Ordering information

Classification	Product type	Nominal cross section (mm²)	Number of levels	Number of cramp position per level	Color	Insulating material	Flammability rating according to UL94	Pack (pcs.)	Weight (gram)	Order code
Feed Through Terminal blocks	Standard terminals	1.0	1	2	Dark grey	PA	V0	50	3.3	XW5T-P1.5-1.1-1
		2.5	1	2		PA	V0	50	6.3	XW5T-P2.5-1.1-1
		4	1	2		PA	V0	50	8.4	XW5T-P4.0-1.1-1
		1.0	1	2	Blue	PA	V0	50	3.3	XW5T-P1.5-1.1-1BL
		2.5	1	2		PA	V0	50	6.3	XW5T-P2.5-1.1-1BL
		4	1	2		PA	V0	50	8.4	XW5T-P4.0-1.1-1BL
	Multi tiers terminal	1.0	2	2	Dark grey	PA	V0	50	6.5	XW5T-P1.5-1.1-2
	Multi tiers terminal	1.0	2	2	Blue	PA	V0	50	6.5	XW5T-P1.5-1.1-2BL
	Multi conductor terminals	1.0	1	3	Dark grey	PA	V0	50	4.1	XW5T-P1.5-1.2-1
		1.0	1	3	Blue	PA	V0	50	4.1	XW5T-P1.5-1.2-1BL
		1.0	1	4	Dark grey	PA	V0	50	4.9	XW5T-P1.5-2.2-1
		1.0	1	4	Blue	PA	V0	50	4.9	XW5T-P1.5-2.2-1BL
Grounding Terminal blocks	Standard terminals	1.0	1	2	Green/yellow	PA	V0	50	4.7	XW5G-P1.5-1.1-1
		2.5	1	2		PA	V0	50	9.9	XW5G-P2.5-1.1-1
		4	1	2		PA	V0	50	11.8	XW5G-P4.0-1.1-1
	Multi tiers terminal	1.0	2	2		PA	V0	50	8.1	XW5G-P1.5-1.1-2
	Multi conductor terminals	1.0	1	3		PA	V0	50	5.5	XW5G-P1.5-1.2-1
	Multi conductor terminals	1.0	1	4		PA	V0	50	6.3	XW5G-P1.5-2.2-1

Accessories

Short bars

Applicable terminal blocks	No. of poles	Colors	Order code
XW5T-P1.5-_ or XW5G-P1.5-_	2	Red (RD) Blue(BL) Yellow (YL)	XW5S-P1.5-2__
	3		XW5S-P1.5-3__
	4		XW5S-P1.5-4__
	5		XW5S-P1.5-5__
	10		XW5S-P1.5-10__
XW5T-P2.5-_ or XW5G-P2.5-_	2	Red (RD) Blue(BL) Yellow (YL)	XW5S-P2.5-2__
	3		XW5S-P2.5-3__
	4		XW5S-P2.5-4__
	5		XW5S-P2.5-5__
	10		XW5S-P2.5-10__
XW5T-P4.0-_ or XW5G-P4.0-_	2	Red (RD) Blue(BL) Yellow (YL)	XW5S-P4.0-2__
	3		XW5S-P4.0-3__
	4		XW5S-P4.0-4__
	5		XW5S-P4.0-5__
	10		XW5S-P4.0-10__

Labels

Applicable terminal blocks	Description	Order code
XW5T-P1.5-_	For Top 1 sheet (102 pieces)	XW5Z-P1.5LB1
XW5T-P1.5-_	For Side 1 sheet (108 pieces)	XW5Z-P1.5LB2
XW5T-P2.5-_	For Top 1 sheet (72 pieces)	XW5Z-P2.5LB1
XW5T-P2.5-_	For Side 1 sheet (72 pieces)	XW5Z-P2.5LB2
XW5T-P4.0-_	For Top 1 sheet (60 pieces)	XW5Z-P4.0LB1
XW5T-P4.0-_	For Side 1 sheet (60 pieces)	XW5Z-P4.0LB2

End cover

Applicable terminal blocks	Order code
XW5_-P1.5-1.1-1	XW5E-P1.5-1.1-1
XW5_-P1.5-1.1-2	XW5E-P1.5-1.1-2
XW5_-P1.5-1.2-1	XW5E-P1.5-1.2-1
XW5_-P1.5-2.2-1	XW5E-P1.5-2.2-1
XW5_-P2.5-1.1-1	XW5E-P2.5-1.1-1
XW5_-P4.0-1.1-1	XW5E-P4.0-1.1-1

End brackets/Separator plates

Name	Width (mm)	Order code
End Brackets	6	XW5Z-EP6
Separator Plates	12	XW5Z-EP12

Specifications

Feed through terminal blocks

Model		XW5T-P1.5-1.1-1 (BL)				XW5T-P2.5-1.1-1 (BL)	XW5T-P4.0-1.1-1 (BL)
Appearance
Internal wiring		1 tier, 1:1				1 tier, 1:1	1 tier, 1:1
Applicable wire sizes	Nominal cross section	1.0 mm²				2.5 mm²	4 mm²
	Minimum conductor cross section solid	0.14 mm²				0.14 mm²	0.2 mm²
	Maximum conductor cross section solid	1.5 mm²				4.0 mm²	6.0 mm²
	Minimum conductor cross section fine stranded	0.08 mm²				0.14 mm²	0.2 mm²
	Maximum conductor cross section fine stranded	1.5 mm²				2.5 mm²	4.0 mm²
	Minimum conductor cross section (flex., stranded) with ferrule with Plastic sleeve	0.14 mm²				0.14 mm²	0.2 mm²
	Maximum conductor cross section (flex., stranded) with ferrule with Plastic sleeve	1.0 mm²				2.5 mm²	4.0 mm²
	Conductor cross section AWG	AWG28 to AWG14				AWG26 to AWG12	AWG24 to AWG10
	Wire strip length	8 mm				10 mm	12 mm
Dimensions (mm)		3.5×45×30.5				5.2×48.8×35.25	6.2×56.1×35.25
Mounting rail		TH35				TH35	TH35
IEC rated voltage		500 V				800 V	800 V
IEC rated current		13.5 A (17.5 A1)				24 A	32 A
Usage Group (UG)		B, C	D			B, C
UL rated voltage		300 V	51-150 V	151-300 V	301-600 V	600 V
UL rated current		15 A (SOL) 10 A (STR)	15 A (SOL) 10 A (STR)	10 A	5 A	20 A/AWG12 (SOL), 15 A/AWG14 (STR)	30 A/AWG10 (SOL), 20 A/AWG12 (STR)
Rated impulse voltage		6 kV				8 kV	8 kV
Dielectric strength		1,890 VAC for 60 min (leakage current: 1 mA max.)				2,000 VAC for 60 min (leakage current: 1 mA max.)	2,000 VAC for 60 min (leakage current: 1 mA max.)
End cover		XW5E-P1.5-1.1-1				XW5E-P2.5-1.1-1	XW5E-P4.0-1.1-1
Special tool		XW4Z-00B				XW4Z-00B	XW4Z-00B
Applicable nameplates		XW5Z-P1.5LB_ or commercially available nameplate with 9.5 mm width and 0.5 mm thickness				XW5Z-P2.5LB_ or commercially available nameplate with 9.5 mm width and 0.5 mm thickness	XW5Z-P4.0LB_ or commercially available nameplate with 9.5 mm width and 0.5 mm thickness
Applicable Short bars		XW5S-P1.5-_ (_: Poles = 2, 3, 4, 5 or 10)				XW5S-P2.5-_ (_: Poles = 2, 3, 4, 5 or 10)	XW5S-P4.0-_ (_: Poles = 2, 3, 4, 5 or 10)

Model		XW5T-P1.5-1.1-2 (BL)		XW5T-P1.5-1.2-1 (BL)		XW5T-P1.5-2.2-1 (BL)
Appearance
Internal wiring		2 tiers, 1:1		1 tier, 1:2		1 tier, 2:2
Applicable wire sizes	Nominal cross section	1.0 mm²		1.0 mm²		1.0 mm²
	Minimum conductor cross section solid	0.14 mm²		0.14 mm²		0.14 mm²
	Maximum conductor cross section solid	1.5 mm²		1.5 mm²		1.5 mm²
	Minimum conductor cross section fine stranded	0.08 mm²		0.08 mm²		0.08 mm²
	Maximum conductor cross section fine stranded	1.5 mm²		1.5 mm²		1.5 mm²
	Minimum conductor cross section (flex., stranded) with ferrule with Plastic sleeve	0.14 mm²		0.14 mm²		0.14 mm²
	Maximum conductor cross section (flex., stranded) with ferrule with Plastic sleeve	1.0 mm²		1.0 mm²		1.0 mm²
	Conductor cross section AWG	AWG28 to AWG14		AWG28 to AWG14		AWG28 to AWG14
	Wire strip length	8 mm		8 mm		8 mm
Dimensions		3.5×65.7×41.1		3.5×54.1×30.5		3.5×63.2×30.5
Mounting rail		TH35		TH35		TH35
IEC rated voltage		500 V		500 V		500 V
IEC rated current		13.5 A (17.5 A2)		13.5 A (17.5 A1)		13.5 A (17.5 A1)
Usage Group (UG)		B, C	D
UL rated voltage		300 V	51-150 V		151-300 V		301-600 V
UL rated current		15 A (SOL), 10 A (STR)	15 A (SOL), 10 A (STR)		10 A		5 A
Rated impulse voltage		6 kV		6 kV		6 kV
Dielectric strength		1,890 VAC for 60 min (leakage current: 1 mA max.)		1,890 VAC for 60 min (leakage current: 1 mA max.)		1,890 VAC for 60 min (leakage current: 1 mA max.)
End cover		XW5E-P1.5-1.1-2		XW5E-P1.5-1.2-1		XW5E-P1.5-2.2-1
Special tool		XW4Z-00B		XW4Z-00B		XW4Z-00B
Applicable nameplates		XW5Z-P1.5LB_ or commercially available nameplate with 9.5 mm width and 0.5 mm thickness		XW5Z-P1.5LB_ or commercially available nameplate with 9.5 mm width and 0.5 mm thickness		XW5Z-P1.5LB_ or commercially available nameplate with 9.5 mm width and 0.5 mm thickness
Applicable Short bars		XW5S-P1.5-_ (_: Poles = 2, 3, 4, 5 or 10)		XW5S-P1.5-_ (_: Poles = 2, 3, 4, 5 or 10)		XW5S-P1.5-_ (_: Poles = 2, 3, 4, 5 or 10)

Grounding terminal blocks

Model		XW5G-P1.5-1.1-1	XW5G-P2.5-1.1-1	XW5G-P4.0-1.1-1
Appearance
Internal wiring		1 tier, 1:1	1 tier, 1:1	1 tier, 1:1
Applicable wire sizes	Nominal cross section	1.0 mm²	2.5 mm²	4 mm²
	Minimum conductor cross section solid	0.14 mm²	0.14 mm²	0.2 mm²
	Maximum conductor cross section solid	1.5 mm²	4.0 mm²	6.0 mm²
	Minimum conductor cross section fine stranded	0.08 mm²	0.14 mm²	0.2 mm²
	Maximum conductor cross section fine stranded	1.5 mm²	2.5 mm²	4.0 mm²
	Minimum conductor cross section (flex., stranded) with ferrule with Plastic sleeve	0.14 mm²	0.14 mm²	0.2 mm²
	Maximum conductor cross section (flex., stranded) with ferrule with Plastic sleeve	1.0 mm²	2.5 mm²	4.0 mm²
	Conductor cross section AWG	AWG28 to AWG14	AWG26 to AWG12	AWG24 to AWG10
	Wire strip length	8 mm	10 mm	12 mm
Dimensions		3.5×45×30.5	5.2×48.8×35.25	6.2×56.1×35.25
Mounting rail		TH35	TH35	TH35
IEC rated voltage		500 V	800 V	800 V
IEC rated current		-	-	-
UL rated voltage		600 V	600 V	600 V
UL rated current		-	-	-
Rated impulse voltage		6 kV	8 kV	8 kV
Dielectric strength		1,890 VAC for 60 min (leakage current: 1 mA max.)	2,000 VAC for 60 min (leakage current: 1 mA max.)	2,000 VAC for 60 min (leakage current: 1 mA max.)
End cover		XW5E-P1.5-1.1-1	XW5E-P2.5-1.1-1	XW5E-P4.0-1.1-1
Special tool		XW4Z-00B	XW4Z-00B	XW4Z-00B
Applicable nameplates		XW5Z-P1.5LB_ or commercially available nameplate with 9.5 mm width and 0.5 mm thickness	XW5Z-P2.5LB_ or commercially available nameplate with 9.5 mm width and 0.5 mm thickness	XW5Z-P4.0LB_ or commercially available nameplate with 9.5 mm width and 0.5 mm thickness
Applicable Short bars		XW5S-P1.5-_ (_: Poles = 2, 3, 4, 5 or 10)	XW5S-P2.5-_ (_: Poles = 2, 3, 4, 5 or 10)	XW5S-P4.0-_ (_: Poles = 2, 3, 4, 5 or 10)

Model		XW5G-P1.5-1.1-2	XW5G-P1.5-1.2-1	XW5G-P1.5-2.2-1
Appearance and internal wiring
Internal wiring		2 tiers, 1:1	1 tier, 1:2	1 tier, 2:2
Applicable wire sizes	Nominal cross section	1.0 mm²	1.0 mm²	1.0 mm²
	Minimum conductor cross section solid	0.14 mm²	0.14 mm²	0.14 mm²
	Maximum conductor cross section solid	1.5 mm²	1.5 mm²	1.5 mm²
	Minimum conductor cross section fine stranded	0.08 mm²	0.08 mm²	0.08 mm²
	Maximum conductor cross section fine stranded	1.5 mm²	1.5 mm²	1.5 mm²
	Minimum conductor cross section (flex., stranded) with ferrule with Plastic sleeve	0.14 mm²	0.14 mm²	0.14 mm²
	Maximum conductor cross section (flex., stranded) with ferrule with Plastic sleeve	1.0 mm²	1.0 mm²	1.0 mm²
	Conductor cross section AWG	AWG28 to AWG14	AWG28 to AWG14	AWG28 to AWG14
	Wire strip length	8 mm	8 mm	8 mm
Dimensions		3.5×65.7×41.1	3.5×54.1×30.5	3.5×63.2×30.5
Mounting rail		TH35	TH35	TH35
IEC rated voltage		500 V	500 V	500 V
IEC rated current		-	-	-
UL rated voltage		600 V	600 V	600 V
UL rated current		-	-	-
Rated impulse voltage		6 kV	6 kV	6 kV
Dielectric strength		1,890 VAC for 60 min (leakage current: 1 mA max.)	1,890 VAC for 60 min (leakage current: 1 mA max.)	1,890 VAC for 60 min (leakage current: 1 mA max.)
End cover		XW5E-P1.5-1.1-2	XW5E-P1.5-1.2-1	XW5E-P1.5-2.2-1
Special tool		XW4Z-00B	XW4Z-00B	XW4Z-00B
Applicable nameplates		XW5Z-P1.5LB_ or commercially available nameplate with 9.5 mm width and 0.5 mm thickness	XW5Z-P1.5LB_ or commercially available nameplate with 9.5 mm width and 0.5 mm thickness	XW5Z-P1.5LB_ or commercially available nameplate with 9.5 mm width and 0.5 mm thickness
Applicable Short bars		XW5S-P1.5-_ (_: Poles = 2, 3, 4, 5 or 10)	XW5S-P1.5-_ (_: Poles = 2, 3, 4, 5 or 10)	XW5S-P1.5-_ (_: Poles = 2, 3, 4, 5 or 10)

Short bars

Model	XW5S-P1.5-_	XW5S-P2.5-_	XW5S-P4.0-_
Rated voltage	500 V	800 V
Rated current	17.5 A	24 A	32 A

1. Rated current with 1.5 mm² conductor cross section wire.

2. Rated current with 1.5 mm² conductor cross section wire.

1. Rated current with 1.5 mm² conductor cross section wire.

2. Rated current with 1.5 mm² conductor cross section wire.

Появились вопросы?

Мы готовы помочь.

Свяжитесь с нами

Подписаться на новости и обновления о продуктах

Подпишитесь на новостную рассылку и получайте новости о разработках продукции, решениях и услугах прямо на свой почтовый ящик.

Благодарим Вас за подписку на Omron eNews. В ближайшее время на электронный адрес, который Вы указали при регистрации, будет выслано уведомление о подтверждении подписки. Чтобы подтвердить подписку, проследуйте указанной в письме ссылке. Данная процедура необходима для соблюдения существующих правовых норм и в целях предотвращения возможного злоупотребления Вашим электронным адресом третьими лицами.

Возникли технические проблемы. Ваша форма не была отправлена. Примите наши извинения и повторите попытку позже. Детали: [details]

Download

Техническая документация

Загрузить даташиты, руководства и брошюры.

Перейти на страницу загрузки

Обучающие курсы

Пройти обучающие курсы от наших лучших специалистов. От начального до продвинутого уровня.

Просмотреть обучающие курсы

Мы используем файлы cookie для обеспечения наиболее удобной работы с сайтом.

Войти в систему

Регистрация

Спасибо за регистрацию на сайте компании Omron

получите прямой доступ

Благодарим вас за проявленный интерес

Country Selector

XW5_-P

Блоки клемм Push-in для монтажа на DIN-рейку

Ordering information