ZX-L

Библиотека дву-/трехмерных CAD рисунков
ZX-L-N Smart Sensors (Laser Type) Спецификация

Микропроцессорный лазерный измерительный датчик, отличающийся высокой точностью и быстродействием

Микропроцессорные датчики ZX-L работают по принципу "подключи и измеряй", обеспечивая эффективное решение задач, требующих высокого разрешения и быстродействия. Широкий диапазон сменных измерительных головок предоставляет большую гибкость при реализации систем с самыми высокими требованиями.

Легкие, миниатюрные головки датчиков легко подсоединяются и сменяются
Время реакции всего 150 мкс
Простая смена головки датчика
Модульная конструкция датчиков ZX обеспечивает большую гибкость применения.
Подключение до пяти датчиков для многоканального измерения

Характеристики и информация для заказа

Ordering information

Sensors

Sensor head (reflection type)

Optical method	Beam shape	Sensing distance	Resolution 1	Size in mm (H × W × D)	Order code
Diffuse-reflective	Spot beam	40±10 mm	2 µm	39 × 33 × 17	ZX-LD40
		100±40 mm	16 µm		ZX-LD100
		300±200 mm	300 µm		ZX-LD300
	Line beam	40±10 mm	2 µm		ZX-LD40L
		100±40 mm	16 µm		ZX-LD100L
		300±200 mm	300 µm		ZX-LD300L
Regular reflection type	Spot beam	30±2 mm	0.25 µm	45 × 55 × 25	ZX-LD30V
Regular reflection type	Line beam	30±2 mm	0.25 µm	45 × 55 × 25	ZX-LD30VL

Sensor head (through-beam)

Optical method	Measurement width	Sensing distance	Resolution 2	Size in mm (H × W × D)		Order code
Optical method	Measurement width	Sensing distance	Resolution 2	Transmitter	Receiver	Order code
Through-beam	1 mm dia.	0 to 2,000 mm	4 µm	15 × 15 × 34	15 × 15 × 19	ZX-LT001
	5 mm	0 to 500 mm		15 × 15 × 34	15 × 15 × 19	ZX-LT005
	10 mm			20 × 20 × 42	20 × 20 × 25	ZX-LT010
	30 mm		12 µm	64.25 × 70 × 22.6	64.25 × 54 × 22.6	ZX-LT030

Amplifier units

Power supply	Output specifications	Order code
DC	NPN output	ZX-LDA11-N
DC	PNP output	ZX-LDA41-N

Note: Compatible with sensor head connection.

Accessories (order separately)

Calculating unit

	Order code
Calculating unit	ZX-CAL2

Side-view attachments

Applicable sensor head	Order code
ZX-LT1001/LT005	ZX-XF12
ZX-LT010	ZX-XF22

SmartMonitor sensor setup tool for Personal Computer connection

Name	Order code
ZX-series communications interface unit	ZX-SF11
ZX-series communications interface unit + Setup Software (CD-ROM)	ZX-SFW11EV33 , 4
ZX-series sensor setup and logging software (CD-ROM)	ZX-SW11EV31

Name

Order code

ZX-series communications interface unit

ZX-SF11

ZX-series communications interface unit

+ Setup Software (CD-ROM)

ZX-SFW11EV33 , 4

ZX-series sensor setup and logging software (CD-ROM)

ZX-SW11EV31

Cables with connectors on both ends (for extension)1

Cable length	Order code
1 m	ZX-XC1A
4 m	ZX-XC4A
8 m	ZX-XC8A
9 m2	ZX-XC9A

*1 Robot cable models are also available. The model numbers are ZX-XC_R.

*2 For use only with reflective sensors.

Specifications

Sensor head (reflection type)

Item	ZX-LD40	ZX-LD100	ZX-LD300	ZX-LD30V	ZX-LD40L	ZX-LD100L	ZX-LD300L	ZX-LD30VL
Optical method	Diffuse reflection			Regular reflection	Diffuse reflection			Regular reflection
Light source (wave length)	Visible-light semiconductor laser (wavelength 650 nm, 1 mW or less, Class 2)
Measurement center distance	40 mm	100 mm	300 mm	30 mm	40 mm	100 mm	300 mm	30 mm
Measurement range	±10 mm	±40 mm	±200 mm	±2 mm	±10 mm	±40 mm	±200 mm	±2 mm
Beam shape	Spot				Line
Beam diameter5	50 µm dia.	100 µm dia.	300 µm dia.	75 µm dia.	75 µmx2mm	150 µmx2 mm	450 µmx2 mm	100 µmx1.8 mm
Resolution6	2 µm	16 µm	300 µm	0.25 µm	2 µm	16 µm	300 µm	0.25 µm
Linearity7	±0.2% F.S. (entire range)	±0.2% F.S. (80 to 121 mm)	±2% F.S. (200 to 401 mm)	±0.2% F.S. (entire range)	±0.2% F.S. (32 to 49 mm)	±0.2% F.S. (80 to 121 mm)	±2% F.S. (200 to 401 mm)	±0.2% F.S. (entire range)
Temperature characteristic8	±0.03% FS/°C (except for ZX-LD300 and ZX-LD300L, which are ±0.1% FS/°C.)
Ambient illumination	Incandescent lamp: 3,000 lx max. (on light receiving side)
Ambient temperature	Operating: 0 to 50°C, storage: -15 to 60°C (with no icing or condensation)
Ambient humidity	Operating and storage: 35% to 85% (with no condensation)
Insulation resistance	20 MΩ min. at 500 VDC
Dielectric strength	1,000 VAC, 50/60 Hz for 1 min
Vibration resistance (destruction)	10 to 150 Hz, 0.7-mm double amplitude 80 min each in X, Y, and Z directions
Shock resistance (destruction)	300 m/s2 3 times each in six directions (up/down, left/right, forward/backward)
Protective structure	IEC 60529 IP50			IEC standard IP40	IEC 60529 IP50			IEC standard IP40
Connection method	Connector relay (standard cable length: 500 mm)
Weight (packed state)	Approx. 150 g			Approx. 250 g	Approx. 150 g			Approx. 250 g
Materials	Case: PBT (polybutylene terephthalate), Cover: Aluminum, lens: Glass			Case and cover: Aluminum, lens: Glass	Case: PBT (polybutylene terephthalate), Cover: Aluminum, lens: Glass			Case and cover: Aluminum, lens: Glass
Accessories	Instruction sheet, Laser warning label (English)

Note: Highly reflective objects can result in incorrect detection by causing out-of-range measurements.

Sensor head (through-beam)

Item			ZX-LT001		ZX-LT005	ZX-LT010	ZX-LT030
Optical method			Through-beam
Light source (wave length)			Visible-light semiconductor laser (wavelength 650 nm, 1 mW or less, Class 1)
	Maximum output		0.2 mW max.		0.35 mW max.		0.2 mW max.
Measurement width			1 mm dia.	1 to 2.5 mm dia.	5 mm	10 mm	30 mm
Sensing distance			0 to 500 mm	500 to 2,000 mm	0 to 500 mm
Min. sensing object			8 mm dia. opaque object	8 to 50 µm opaque object	opaque: 0.05 mm dia.	opaque: 0.1 mm dia.	opaque: 0.3 mm dia.
Resolution9			4 µm10	-	4 µm11		12 µm12
Temperature characteristic			±0.2% FS/°C				±0.3% FS/°C
Ambient illumination			Incandescent lamp: 10,000 lx max. (on light-receiving side)
Ambient temperature			Operating: 0 to 50°C, storage: -25 to 70°C (with no icing or condensation)
Ambient humidity			Operating: 35% to 85% (with no condensation)
Protective structure			IEC 60529 IP40				IP 40
Connection method			Connector relay (standard cable length: 500 mm)
Weight (packed state)			Approx. 220 g				Approx. 450 g
Cable length			Extendable up to 10 m with special extension cable.
Materials		Case	Polyetherimide				Zinc die-cast
		Cover	Polycarbonate				Zinc die-cast
		Front filter	Glass
Tightening torque			0.3 Nm max.
Accessories			Instruction sheet, sensor head-amplifier connection cable
Accessories			Optical axis adjustment seal				Mounting Bracket

Amplifier units

Item	ZX-LDA11-N	ZX-LDA41-N
Measurement period	150 μs
Possible average count settings13	1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1,024, 2,048, or 4,096
Temperature characteristic	When connected to a reflective sensor head: 0.01% FS/°C, when connected to a through-beam sensor head: 0.1% FS/°C
Linear output14	4 to 20 mA/FS, max. load resistance: 300 Ω, ± 4 V ( ± 5 V, 1 to 5 V 15), output impedance: 100 Ω
Judgement outputs (3 outputs: HIGH/PASS/LOW)1	NPN open-collector outputs, 30 VDC, 50 mA max. Residual voltage: 1.2 V max.	PNP open-collector outputs, 30 VDC, 50 mA max. Residual voltage: 2 V max.
Laser OFF input, zero reset input, timing input, reset input	ON: Short-circuited with 0-V terminal or 1.5 V or less OFF: Open (leakage current: 0.1 mA max.)	ON: Supply voltage short-circuited or supply voltage within 1.5 V OFF: Open (leakage current: 0.1 mA max.)
Functions	Measurement value display, present value/set value/light level/resolution display, scaling, display reverse, display OFF mode, ECO mode, number of display digit changes, sample hold, peak hold, bottom hold, peak-to-peak hold, self-peak hold, self-bottom hold, average hold, delay hold, intensity mode, zero reset, initial reset, ON-delay timer, OFF-delay timer, one-shot timer, deviation, previous value comparison, sensitivity adjustment, keep/clamp switch, direct threshold value setting, position teaching, 2-point teaching, automatic teaching, hysteresis width setting, timing inputs, reset input, monitor focus, linear output compensation, (A-B) calculations16, (A+B) calculations4, mutual interference4, laser deterioration detection, zero reset memory, zero reset display, key lock
Indications	Operation indicators: High (orange), pass (green), low (yellow), 7-segment main display (red), 7-segment subdisplay (yellow), laser ON (green), zero reset (green), enable (green)
Power supply voltage	12 to 24 VDC ± 10%, Ripple (p-p): 10% max.
Current consumption	140 mA max. with power supply voltage of 24 VDC (with sensor connected)
Ambient temperature	Operating: 0 to 50°C, storage: -15 to 60°C (with no icing or condensation)
Ambient humidity	Operating and storage: 35% to 85% (with no condensation)
Insulation resistance	20 MΩ min. at 500 VDC
Dielectric strength	1,000 VAC, 50/60 Hz for 1 min
Vibration resistance (destruction)	10 to 150 Hz, 0.7-mm double amplitude 80 min each in X, Y, and Z directions
Shock resistance (destruction)	300 m/s2 3 times each in six directions (up/down, left/right, forward/backward)
Connection method	Prewired (standard cable length: 2 m)
Weight (packed state)	Approx. 350 g
Materials	Case: PBT (polybutylene terephthalate), cover: Polycarbonate
Accessories	Instruction sheet

Calculating unit

Item	ZX-CAL2
Applicable amplifier units	ZX-LDA11-N/41-N/ZX-EDA11/41/ZX-TDA11/41
Current consumption	12 mA max. (supplied from the smart sensor amplifier unit)
Ambient temperature	Operating: 0 to 50°C, storage: -15 to 60°C (with no icing or condensation)
Ambient humidity	Operating and storage: 35% to 85% (with no condensation)
Connection method	Connector
Dielectric strength	1,000 VAC, 50/60 Hz for 1 min
Insulation resistance	100 MΩ (at 500 VDC)
Vibration resistance (destructive)	10 to 150 Hz, 0.7-mm double amplitude 80 min each in X, Y, and Z directions
Shock resistance (destructive)	300 m/s2 3 times each in six directions (up/down, left/right, forward/backward)
Materials	Display: Acrylic, case: ABS resin
Weight (packed state)	Approx. 50 g

ZX-series Communications Interface Unit

Item		ZX-SF11
Current consumption		60 mA max. (supplied by the amplifier unit)
Applicable amplifier units		ZX series
Applicable amplifier unit versions		ZX-LDA_1-N Ver. 1.000 or higher ZX-EDA_1 Ver. 1.100 or higher ZX-TDA_1 Ver. 1.000 or higher
Max. No. of amplifier units		5
Communications functions	Communications port	RS-232C port (9-pin D-Sub connector)
	Communications protocol	CompoWay/F17
	Baud rate	38,400 bps
	Data configuration	Data bits: 8, parity: none, start bits: 1, stop bits: 1, flow control: none
Indicators		Power supply: green, sensor communications: green, sensor communications error: red, external terminal communications: green, external terminal communications error: red
Protective circuits		Reverse polarity protection
Ambient temperature		Operating: 0 to 50°C, storage: -15 to 60°C (with no icing or condensation)
Ambient humidity		Operating and storage: 35% to 85% (with no condensation)
Insulation resistance		20 MΩ min. (at 500 VDC)
Dielectric strength		1,000 VAC, 50/60 Hz for 1 min, Leakage current: 10 mA max.
Materials		Case: PBT (polybutylene terephthalate), cover: Polycarbonate
Accessories		Instruction sheet, 2 clamps

1. At average count of 4,096 times

2. At average count of 64 times

3. When using the ZX-TDA11/41 with the SmartMonitor, either the ZX-SFW11EV3 or the
ZX-SW11EV3 SmartMonitor must be used. Earlier versions cannot be used.

4. The ZX-SFW11EV3 SmartMonitor can be used only to set functions and monitor waveforms.

5. Beam diameter: This is the value of the measurement center distance (actual value), and is defined at 1/e2 (13.5%) of the central light intensity. If there is stray light outside, the defined area and the area around the object has a higher reflectance than the object.

6. Resolution: Indicates the amount of fluctuation (±3 δ) in the linear output when connected to the ZX-LDA. (The measured value when the average count of the ZX-LDA is set to 4,096 and our standard object (white ceramic) is used for the central distance.) This indicates the repeatability precision when the work is in a static state, and does indicate the distance precision. The resolution performance may not be satisfactory in a strong electromagnetic field.

7. Linearity: This indicates the error with respect to the ideal straight line of the displacement output when measuring our standard object.

8. Temperature characteristic: The temperature characteristic is measured at the measurement point with the sensor and reference object (Omron’s standard reference object) secured with an aluminum jig.

9. The amount of fluctuation (±3 δ) of the linear output when connected to an amplifier unit, converted to a detection span.

10. When the average count is 64. 5 µm when the count is 32. The value when the smallest detection object shades the vicinity of the center of the 1 mm dia. detection span.

11. When the average count is 64. 5 µm when the count is 32.

12. For an average count of 64. The value is 15 µm for an average count of 32.

13. The response speed of the linear output is calculated as the measurement period x (average count setting + 1) (with fixed sensitivity).
The response speed of the judgement outputs is calculated as the measurement period x (average count setting + 1) (with fixed sensitivity).

14. The output can be switched between a current output and voltage output using a switch on the bottom of the amplifier unit.

15. Setting is possible via the monitor focus function.

16. A calculating unit (ZX-CAL2) is required.

17. Contact your Omron representative for CompoWay/F communications specifications.