ZX1

Библиотека дву-/трехмерных CAD рисунков
ZX1 Smart Laser Sensor with Built-in Amplifier Спецификация

Максимальная эффективность для оптимальной производительности

Максимальная эффективность теперь доступна в размере спичечной коробки. Мы представляем новый класс измерительных датчиков, в которых используется усовершенствованный чип камеры HSDR-CMOS (быстродействующий датчик с широким динамическим диапазоном).

Стабильность измерений для объектов с любой поверхностью
Лучшая в своем классе точность и скорость
Компактный размер для быстрого крепления
Увеличенный диапазон измерения
Простая настройка одной кнопкой, интеллектуальная настройка
Надежность измерений в агрессивных средах
Встроенный дисплей

Характеристики и информация для заказа

Ordering information

Sensors

Appearance	Connection method	Cable length	Sensing distance	Order code
Appearance	Connection method	Cable length	Sensing distance	NPN output	PNP output
	Pre-wired	2 m		ZX1-LD50A61 2M	ZX1-LD50A81 2M
	Pre-wired	5 m		ZX1-LD50A61 5M	ZX1-LD50A81 5M
	Pre-wired connector	0.5 m		ZX1-LD50A66 0.5M	ZX1-LD50A86 0.5M
	Pre-wired	2 m		ZX1-LD100A61 2M	ZX1-LD100A81 2M
	Pre-wired	5 m		ZX1-LD100A61 5M	ZX1-LD100A81 5M
	Pre-wired connector	0.5 m		ZX1-LD100A66 0.5M	ZX1-LD100A86 0.5M
	Pre-wired	2 m		ZX1-LD300A61 2M	ZX1-LD300A81 2M
	Pre-wired	5 m		ZX1-LD300A61 5M	ZX1-LD300A81 5M
	Pre-wired connector	0.5 m		ZX1-LD300A66 0.5M	ZX1-LD300A86 0.5M
	Pre-wired	2 m		ZX1-LD600A61 2M	ZX1-LD600A81 2M
	Pre-wired	5 m		ZX1-LD600A61 5M	ZX1-LD600A81 5M
	Pre-wired connector	0.5 m		ZX1-LD600A66 0.5M	ZX1-LD600A86 0.5M

Accessories (sold separately)

Extension cables for pre-wired connector models

An Extension cable is not provided with the sensor. Order an extension cable separately.

Cable length	Order code
10 m	ZX0-XC10R
20 m	ZX0-XC20R

Specifications

Model		NPN output	ZX1-LD50A61 ZX1-LD50A66	ZX1-LD100A61 ZX1-LD100A66	ZX1-LD300A61 ZX1-LD300A66	ZX1-LD600A61 ZX1-LD600A66
Item		PNP output	ZX1-LD50A81 ZX1-LD50A86	ZX1-LD100A81 ZX1-LD100A86	ZX1-LD300A81 ZX1-LD300A86	ZX1-LD600A81 ZX1-LD600A86
Measurement range			50±10 mm	100±35 mm	300±150 mm	600±400 mm
Light source (wave length)			Visible-light semiconductor laser (wavelength: 660 nm, 1 mW max., IEC/EN Class 2, FDA Class II 1 )
Spot diameter (typical) (Defined at the measurement center distance) 2			0.17 mm dia.	0.33 mm dia.	0.52 mm dia.	0.56 mm dia.
Power supply voltage			10 to 30 VDC, including 10% ripple (p-p)
Current consumption			250 mA max. (at power supply voltage 10 VDC)
Control output			Load power supply voltage: 30 VDC max., Load current: 100 mA max. (Residual voltage: 1 V max. (load current 10 mA or less), 2 V max. (load current of 10 to 100 mA))
Analog output			Current output: 4 to 20 mA, maximum load resistance: 300 Ω
Indicators			Digital display (red), output indicator (OUT1, OUT2) (orange), zero reset indicator (orange), menu indicator (orange), laser ON indicator (green), and smart tuning indicator (blue)
Response time	Judgment output		Super-high-speed (SHS) Mode: 1 ms High-speed (HS) Mode: 10 ms Standard (Stnd) Mode: 100 ms
	Laser OFF input		200 ms max.
	Zero reset input		200 ms max.
Temperature characteristic 3			0.03% F.S./°C			0.04% F.S./°C
Linearity 4			±0.15% F.S.		±0.25% F.S.	±0.25% F.S. (200 to 600 mm) ±0.5% F.S. (entire range)
Resolution 5			2 µm	7 µm	30 µm	80 µm
Ambient illumination			Illumination on received light surface: 7,500 lx or less (incandescent light)		Illumination on received light surface: 5,000 lx or less (incandescent light)
Ambient temperature			Operating: -10 to 55°C, Storage: -15 to 70°C (with no icing or condensation)
Ambient humidity			Operating and storage: 35% to 85% (with no condensation)
Dielectric strength			1,000 VAC, 50/60 Hz, 1 minute3
Vibration resistance (destruction)			10 to 55 Hz, 1.5-mm double amplitude, 2 hours each in X, Y, and Z directions
Shock resistance (destruction)			500 m/s2 3 times each in X, Y, and Z directions
Degree of protection 6			IEC 60529, IP67
Connection method			Pre-wired model (Standard cable length: 2 m, 5 m) Pre-wired connector model (Standard cable length: 0.5 m)
Weight (packed state/ sensor only)	Pre-wired models (2 m)		Approx. 240 g / Approx. 180 g		Approx. 270 g / Approx. 210 g
	Pre-wired models (5 m)		Approx. 450 g / Approx. 330 g		Approx. 480 g / Approx. 360 g
	Pre-wired connector models (0.5 m)		Approx. 170 g / Approx. 110 g		Approx. 200 g / Approx. 140 g
Materials			Case and cover: PBT (polybutylene terephthalate), Optical window: Glass, Cable: PVC, Mounting hole part: SUS303
Accessories			Instruction sheet and Laser warning label (English)

Note: False detection outside the measurement range can occur in the case of an object with high reflectance.

1. Classified as Class 2 by EN60825-1 criteria in accordance with the FDA standard previsions of Laser Notice No. 50. Notification to CDRH planned. (Center for Devices and Radiological Health)

2. Spot diameter: Defined as 1/e² (13.5%) of the central intensity at the measurement center distance.
False detections can occur in the case there is light leakage outside the defined region and the surroundings of the target object have a high reflectance in comparison to the target object.
Accurate measurements may not be possible for workpieces that are smaller than the spot diameter.

3. Temperature characteristic: Value for the case the space between the sensor and Omron’s standard target object is secured by an aluminum jig. (Measured at the measurement center distance)

4. Linearity: Indicates the error with respect to the ideal straight line of the displacement output in the case of measuring Omron’s standard target object (white ceramic) at a temperature of 25°C. Linearity and measured value may vary depending on target object.

5. Resolution: Defined in Standard Mode for Omron’s standard target object (white ceramic) after executing Smart Tuning.
The resolution indicates the repetition accuracy for a still workpiece. Not an indication of the distance accuracy.
Resolution performance may not be satisfied in a strong electromagnetic field.

6. IP67 protection applies to the connector on pre-wired connector models if an extension cable is connected.

1. Classified as Class 2 by EN60825-1 criteria in accordance with the FDA standard previsions of Laser Notice No. 50. Notification to CDRH planned. (Center for Devices and Radiological Health)

3. Temperature characteristic: Value for the case the space between the sensor and Omron’s standard target object is secured by an aluminum jig. (Measured at the measurement center distance)

6. IP67 protection applies to the connector on pre-wired connector models if an extension cable is connected.

Ordering information

Sensors

Appearance	Connection method	Cable length	Sensing distance	Order code
Appearance	Connection method	Cable length	Sensing distance	NPN output	PNP output
	Pre-wired	2 m		ZX1-LD50A61 2M	ZX1-LD50A81 2M
	Pre-wired	5 m		ZX1-LD50A61 5M	ZX1-LD50A81 5M
	Pre-wired connector	0.5 m		ZX1-LD50A66 0.5M	ZX1-LD50A86 0.5M
	Pre-wired	2 m		ZX1-LD100A61 2M	ZX1-LD100A81 2M
	Pre-wired	5 m		ZX1-LD100A61 5M	ZX1-LD100A81 5M
	Pre-wired connector	0.5 m		ZX1-LD100A66 0.5M	ZX1-LD100A86 0.5M
	Pre-wired	2 m		ZX1-LD300A61 2M	ZX1-LD300A81 2M
	Pre-wired	5 m		ZX1-LD300A61 5M	ZX1-LD300A81 5M
	Pre-wired connector	0.5 m		ZX1-LD300A66 0.5M	ZX1-LD300A86 0.5M
	Pre-wired	2 m		ZX1-LD600A61 2M	ZX1-LD600A81 2M
	Pre-wired	5 m		ZX1-LD600A61 5M	ZX1-LD600A81 5M
	Pre-wired connector	0.5 m		ZX1-LD600A66 0.5M	ZX1-LD600A86 0.5M

Accessories (sold separately)

Extension cables for pre-wired connector models

An Extension cable is not provided with the sensor. Order an extension cable separately.

Cable length	Order code
10 m	ZX0-XC10R
20 m	ZX0-XC20R

Mounting brackets

Applicable Sensor Heads	Appearance	Contents	Order code
ZX1-LD50_ ZX1-LD100_		Mounting Bracket: 1 Nut plate: 1 Phillips screws (M3×30): 2	E39-L180
ZX1-LD300_ ZX1-LD600_		Mounting Bracket: 1 Nut plate: 1 Phillips screws (M4×35): 2	E39-L181

Applicable Sensor Heads

Appearance

Contents

Order code

ZX1-LD50_

ZX1-LD100_

Mounting Bracket: 1

Nut plate: 1

Phillips screws (M3×30): 2

E39-L180

ZX1-LD300_

ZX1-LD600_

Mounting Bracket: 1

Nut plate: 1

Phillips screws (M4×35): 2

E39-L181

Specifications

Model		NPN output	ZX1-LD50A61 ZX1-LD50A66	ZX1-LD100A61 ZX1-LD100A66	ZX1-LD300A61 ZX1-LD300A66	ZX1-LD600A61 ZX1-LD600A66
Item		PNP output	ZX1-LD50A81 ZX1-LD50A86	ZX1-LD100A81 ZX1-LD100A86	ZX1-LD300A81 ZX1-LD300A86	ZX1-LD600A81 ZX1-LD600A86
Measurement range			50±10 mm	100±35 mm	300±150 mm	600±400 mm
Light source (wave length)			Visible-light semiconductor laser (wavelength: 660 nm, 1 mW max., IEC/EN Class 2, FDA Class II 1 )
Spot diameter (typical) (Defined at the measurement center distance) 2			0.17 mm dia.	0.33 mm dia.	0.52 mm dia.	0.56 mm dia.
Power supply voltage			10 to 30 VDC, including 10% ripple (p-p)
Current consumption			250 mA max. (at power supply voltage 10 VDC)
Control output			Load power supply voltage: 30 VDC max., Load current: 100 mA max. (Residual voltage: 1 V max. (load current 10 mA or less), 2 V max. (load current of 10 to 100 mA))
Analog output			Current output: 4 to 20 mA, maximum load resistance: 300 Ω
Indicators			Digital display (red), output indicator (OUT1, OUT2) (orange), zero reset indicator (orange), menu indicator (orange), laser ON indicator (green), and smart tuning indicator (blue)
Response time	Judgment output		Super-high-speed (SHS) Mode: 1 ms High-speed (HS) Mode: 10 ms Standard (Stnd) Mode: 100 ms
	Laser OFF input		200 ms max.
	Zero reset input		200 ms max.
Temperature characteristic 3			0.03% F.S./°C			0.04% F.S./°C
Linearity 4			±0.15% F.S.		±0.25% F.S.	±0.25% F.S. (200 to 600 mm) ±0.5% F.S. (entire range)
Resolution 5			2 µm	7 µm	30 µm	80 µm
Ambient illumination			Illumination on received light surface: 7,500 lx or less (incandescent light)		Illumination on received light surface: 5,000 lx or less (incandescent light)
Ambient temperature			Operating: −10 to 55°C, Storage: −15 to 70°C (with no icing or condensation)
Ambient humidity			Operating and storage: 35% to 85% (with no condensation)
Dielectric strength			1,000 VAC, 50/60 Hz, 1 minute3
Vibration resistance (destruction)			10 to 55 Hz, 1.5-mm double amplitude, 2 hours each in X, Y, and Z directions
Shock resistance (destruction)			500 m/s2 3 times each in X, Y, and Z directions
Degree of protection 6			IEC 60529, IP67
Connection method			Pre-wired model (Standard cable length: 2 m, 5 m) Pre-wired connector model (Standard cable length: 0.5 m)
Weight (packed state/ sensor only)	Pre-wired models (2 m)		Approx. 240 g / Approx. 180 g		Approx. 270 g / Approx. 210 g
	Pre-wired models (5 m)		Approx. 450 g / Approx. 330 g		Approx. 480 g / Approx. 360 g
	Pre-wired connector models (0.5 m)		Approx. 170 g / Approx. 110 g		Approx. 200 g / Approx. 140 g
Materials			Case and cover: PBT (polybutylene terephthalate), Optical window: Glass, Cable: PVC, Mounting hole part: SUS303
Accessories			Instruction sheet and Laser warning label (English)

Note: False detection outside the measurement range can occur in the case of an object with high reflectance.

1. Classified as Class 2 by EN60825-1 criteria in accordance with the FDA standard previsions of Laser Notice No. 50. Notification to CDRH planned. (Center for Devices and Radiological Health)

3. Temperature characteristic: Value for the case the space between the sensor and Omron’s standard target object is secured by an aluminum jig. (Measured at the measurement center distance)

6. IP67 protection applies to the connector on pre-wired connector models if an extension cable is connected.

1. Classified as Class 2 by EN60825-1 criteria in accordance with the FDA standard previsions of Laser Notice No. 50. Notification to CDRH planned. (Center for Devices and Radiological Health)

3. Temperature characteristic: Value for the case the space between the sensor and Omron’s standard target object is secured by an aluminum jig. (Measured at the measurement center distance)

6. IP67 protection applies to the connector on pre-wired connector models if an extension cable is connected.

Загрузка

Брошюры

ZX1 Проспект

enPDF 204,2 КБ

ZX1 & ZX2 Series Брошюра

enPDF 1,8 МБ

На других языках

Показать все Брошюры

Спецификации

ZX1 Smart Laser Sensor with Built-in Amplifier Спецификация

enPDF 1,8 МБ

Показать все Спецификации

Технические руководства

ZX1-LD__ Инструкция

enPDF 3,3 МБ

Показать все Технические руководства

Появились вопросы?

Мы готовы помочь.

Свяжитесь с нами

Подписаться на новости и обновления о продуктах

Подпишитесь на новостную рассылку и получайте новости о разработках продукции, решениях и услугах прямо на свой почтовый ящик.

Благодарим Вас за подписку на Omron eNews. В ближайшее время на электронный адрес, который Вы указали при регистрации, будет выслано уведомление о подтверждении подписки. Чтобы подтвердить подписку, проследуйте указанной в письме ссылке. Данная процедура необходима для соблюдения существующих правовых норм и в целях предотвращения возможного злоупотребления Вашим электронным адресом третьими лицами.

Возникли технические проблемы. Ваша форма не была отправлена. Примите наши извинения и повторите попытку позже. Детали: [details]

Download

Техническая документация

Загрузить даташиты, руководства и брошюры.

Перейти на страницу загрузки

Обучающие курсы

Пройти обучающие курсы от наших лучших специалистов. От начального до продвинутого уровня.

Просмотреть обучающие курсы

Мы используем файлы cookie для обеспечения наиболее удобной работы с сайтом.

Войти в систему

Регистрация

Спасибо за регистрацию на сайте компании Omron

получите прямой доступ

Благодарим вас за проявленный интерес

Country Selector

ZX1

Максимальная эффективность для оптимальной производительности

Ordering information

Sensors

Accessories (sold separately)

Extension cables for pre-wired connector models

Specifications

Ordering information

Sensors

Accessories (sold separately)